-
Quality Adjustment at Scale: Hedonic vs. Exact Demand-Based Price Indices
June 2023
Working Paper Number:
CES-23-26
This paper explores alternative methods for adjusting price indices for quality change at scale. These methods can be applied to large-scale item-level transactions data that in cludes information on prices, quantities, and item attributes. The hedonic methods can take into account the changing valuations of both observable and unobservable charac teristics in the presence of product turnover. The paper also considers demand-based approaches that take into account changing product quality from product turnover and changing appeal of continuing products. The paper provides evidence of substantial quality-adjustment in prices for a wide range of goods, including both high-tech consumer products and food products.
View Full
Paper PDF
-
Re-engineering Key National Economic Indicators
July 2019
Working Paper Number:
CES-19-22
Traditional methods of collecting data from businesses and households face increasing challenges. These include declining response rates to surveys, increasing costs to traditional modes of data collection, and the difficulty of keeping pace with rapid changes in the economy. The digitization of virtually all market transactions offers the potential for re-engineering key national economic indicators. The challenge for the statistical system is how to operate in this data-rich environment. This paper focuses on the opportunities for collecting item-level data at the source and constructing key indicators using measurement methods consistent with such a data infrastructure. Ubiquitous digitization of transactions allows price and quantity be collected or aggregated simultaneously at the source. This new architecture for economic statistics creates challenges arising from the rapid change in items sold. The paper explores some recently proposed techniques for estimating price and quantity indices in large scale item-level data. Although those methods display tremendous promise, substantially more research is necessary before they will be ready to serve as the basis for the official economic statistics. Finally, the paper addresses implications for building national statistics from transactions for data collection and for the capabilities and organization of the statistical agencies in the 21st century.
View Full
Paper PDF
-
Macro and Micro Dynamics of Productivity: From Devilish Details to Insights
January 2017
Working Paper Number:
CES-17-41R
Researchers use a variety of methods to estimate total factor productivity (TFP) at the firm level and, while these may seem broadly equivalent, how the resulting measures relate to the TFP concept in theoretical models depends on the assumptions about the environment in which firms operate. Interpreting these measures and drawing insights based upon their characteristics thus must take into account these conceptual differences. Absent data on prices and quantities, most methods yield 'revenue productivity' measures. We focus on two broad classes of revenue productivity measures in our examination of the relationship between measured and conceptual TFP (TFPQ). The first measure has been increasingly used as a measure of idiosyncratic distortions and to assess the degree of misallocation. The second measure is, under standard assumptions, a function of funda-
mentals (e.g., TFPQ). Using plant-level U.S. manufacturing data, we find these alternative
measures are (i) highly correlated; (ii) exhibit similar dispersion; and (iii) have similar relationships with growth and survival. These findings raise questions about interpreting the first measure as a measure of idiosyncratic distortions. We also explore the sensitivity of estimates of the contribution of reallocation to aggregate productivity growth to these alternative approaches. We use recently developed structural decompositions of aggregate productivity growth that depend critically on estimates of output versus revenue elasticities. We find alternative approaches all yield a significant contribution of reallocation to
productivity growth (although the quantitative contribution varies across approaches).
View Full
Paper PDF
-
Product Quality and Firm Heterogeneity in International Trade
March 2013
Working Paper Number:
CES-13-08
I develop and implement a methodology for obtaining plant-level estimates of product quality from revenue and physical output data. Intuitively, firms that sell large quantities of output conditional on price are classified as high quality producers. I use this method to decompose cross-plant variation in price and export status into a quality and an efficiency margin. The empirical results show that prices are increasing in quality and decreasing in efficiency. However, selection into exporting is driven mainly by quality. The finding that changes in quality and efficiency have different impact on the firm's export decision is shown to be inconsistent with the traditional iceberg trade cost formulation and points to the importance of per unit transport costs.
View Full
Paper PDF
-
Materials Prices and Productivity
June 2012
Working Paper Number:
CES-12-11
There is substantial within-industry variation, even within industries that use and produce homogeneous inputs and outputs, in the prices that plants pay for their material inputs. I explore, using plant-level data from the U.S. Census Bureau, the consequences and sources of this variation in materials prices. For a sample of industries with relatively homogeneous products, the standard deviation of plant-level productivities would be 7% lower if all plants faced the same materials prices. Moreover, plant-level materials prices are both persistent across time and predictive of exit. The contribution of net entry to aggregate productivity growth is smaller for productivity measures that strip out di'erences in materials prices. After documenting these patterns, I discuss three potential sources of materials price variation: geography, di'erences in suppliers. marginal costs, and suppliers. price discriminatory behavior. Together, these variables account for 13% of the dispersion of materials prices. Finally, I demonstrate that plants.marginal costs are correlated with the marginal costs of their intermediate input suppliers.
View Full
Paper PDF
-
Productivity Dispersion and Plant Selection in the Ready-Mix Concrete Industry
September 2011
Working Paper Number:
CES-11-25
This paper presents a quantitative model of productivity dispersion to explain why inefficient producers are slowly selected out of the ready-mix concrete industry. Measured productivity dispersion between the 10th and 90th percentile falls from a 4 to 1 difference using OLS, to a 2 to 1 difference using a control function. Due to volatile productivity and high sunk entry costs, a dynamic oligopoly model shows that to rationalize small gaps in exit rates between high and low productivity plants, a plant in the top quintile must produce 1.5 times more than a plant in the bottom quintile.
View Full
Paper PDF
-
Using the Survey of Plant Capacity to Measure Capital Utilization
July 2011
Working Paper Number:
CES-11-19
Most capital in the United States is idle much of the time. By some measures, the average workweek of capital in U.S. manufacturing is as low as 55 hours per 168 hour week. The level and variability of capital utilization has important implications for understanding both the level of production and its cyclical fluctuations. This paper investigates a number of issues relating to aggregation of capital utilization measures from the Survey of Plant Capacity and makes recommendations on expanding and improving the published statistics deriving from the Survey of Plant Capacity. The paper documents a number of facts about properties of capital utilization. First, after growing for decades, capital utilization started to fall in mid 1990s. Second, capital utilization is a useful predictor of changes in capacity utilization and other factors of production. Third, adjustment of productivity measures for variable capital utilization improves statistical and economic properties of these measures. Fourth, the paper constructs weights to aggregate firm level capital utilization rates to industry and economy level, which is the major enhancement to available data.
View Full
Paper PDF
-
How Does Size Matter? Investigating the Relationships Among Plant Size, Industrial Structure, and Manufacturing Productivity
March 2011
Working Paper Number:
CES-11-08
Industrial concentration and market power have been studied extensively at the national scale, in fields ranging from economics and industrial organization to regional science and economic development. At the regional scale, however, industrial structure and firm size relationships have received little attention outside of non-generalizable case studies, primarily because accurate measurements require difficult-to-obtain plant- or firm-level information. Readily available secondary data sources on establishment size distributions (such as County Business Patterns or the Census of Manufactures) cannot be linked to performance information for particular establishments or firms. Yet region-specific industrial structure may be a crucial determinant of firm performance and thus regional economic fortunes as well (Chinitz 1961; Christopherson and Clark 2007). This paper examines how industrial concentration and agglomeration economies impact plant performance, focusing on the influence of establishment size in mediating these effects. The Longitudinal Research Database of the U.S. Census Bureau is accessed to construct production functions for three manufacturing industries nationwide. These production functions, specified at the establishment level, incorporate characteristics of establishments, industries, and regions, including spatially-differentiated measures of agglomeration economies. Establishment size is evaluated both as an absolute metric and relative to other regional industry plants, as theory suggests that absolute size may be most pertinent to agglomeration benefits but relative size more relevant to industrial structure (Caves and Barton 1990; Bothner 2005). The research builds on earlier work by the author that establishes a direct link between regional industry concentration and the productivity of manufacturing establishments.
View Full
Paper PDF
-
Prices, Spatial Competition, and Heterogeneous Producers: An Empirical Test
August 2004
Working Paper Number:
CES-04-16
In markets where spatial competition is important, many models predict that average prices are lower in denser markets (i.e., those with more producers per unit area). Homogeneous-producer models attribute this effect solely to lower optimal markups. However, when producers instead differ in their production costs, a second mechanism also acts to lower equilibrium prices: competition-driven selection on costs. Consumers' greater substitution possibilities in denser markets make it more difficult for high-cost firms to profitably operate, truncating the equilibrium cost (and price) distributions from above. This selection process can be empirically distinguished from the homogenous-producer case because it implies that not only do average prices fall as density rises, but that upper-bound prices and price dispersion should also decline as well. I find empirical support for this process using a rich set of price data from U.S. ready-mixed concrete plants. Features of the industry offer an arguably exogenous source of producer density variation with which to identify these effects. I also show that the findings do not simply result from lower factor prices in dense markets, but rather because dense-market producers are low-cost because they are more efficient.
View Full
Paper PDF
-
Scale Economies and Consolidation in Hog Slaughter
March 2000
Working Paper Number:
CES-00-03
We use establishment based panel data to estimate a cost function which identifies the role of scale economies in hog slaughter consolidation. We find modest by extensive technological scale economies in the 1990s, and they became more important over time. But wages rose sharply with plant size through the 1970s and those wage premiums generated a pecuniary scale diseconomy that largely offset the effects of technological scale economies. The size-wage relation disappeared in the 1980; with growing technological scale economies and disappearing pecuniary diseconomies, large plants realized growing cost advantages over smaller plants, and production shifted to larger plants.
View Full
Paper PDF
