Papers Containing Tag(s): 'Permanent Plant Number'
The following papers contain search terms that you selected. From the papers listed below, you can navigate to the PDF, the profile page for that working paper, or see all the working papers written by an author. You can also explore tags, keywords, and authors that occur frequently within these papers.
See Working Papers by Tag(s), Keywords(s), Author(s), or Search Text
Click here to search again
Frequently Occurring Concepts within this Search
Authors
Ron Jarmin - 3
Viewing papers 1 through 10 of 32
-
Working PaperAllocation of Company Research and Development Expenditures to Industries Using a Tobit Model
November 2015
Working Paper Number:
CES-15-42
This paper uses Census microdata and a regression-based approach to assign multi-division firms' pre-2008 Research and Development (R&D) expenditures to more than one industry. Since multi-division firms conduct R&D in more than one industry, assigning R&D to corresponding industries provides a more accurate representation of where R&D actually takes place and provides a consistent time-series with the National Science Foundation R&D by line of business information. Firm R&D is allocated to industries on the basis of observed industry payroll, as befits the historic importance of payroll in Census assignments of firms to industry. The results demonstrate that the method of assigning R&D to industries on the basis of payroll works well in earlier years, but becomes less effective over time as firms outsource their manufacturing function.View Full Paper PDF
-
Working PaperRECOVERING THE ITEM-LEVEL EDIT AND IMPUTATION FLAGS IN THE 1977-1997 CENSUSES OF MANUFACTURES
September 2014
Working Paper Number:
CES-14-37
As part of processing the Census of Manufactures, the Census Bureau edits some data items and imputes for missing data and some data that is deemed erroneous. Until recently it was difficult for researchers using the plant-level microdata to determine which data items were changed or imputed during the editing and imputation process, because the edit/imputation processing flags were not available to researchers. This paper describes the process of reconstructing the edit/imputation flags for variables in the 1977, 1982, 1987, 1992, and 1997 Censuses of Manufactures using recently recovered Census Bureau files. Thepaper also reports summary statistics for the percentage of cases that are imputed for key variables. Excluding plants with fewer than 5 employees, imputation rates for several key variables range from 8% to 54% for the manufacturing sector as a whole, and from 1% to 72% at the 2-digit SIC industry level.View Full Paper PDF
-
Working PaperRANDOMIZED SAFETY INSPECTIONS AND RISK EXPOSURE ON THE JOB: QUASI-EXPERIMENTAL ESTIMATES OF THE VALUE OF A STATISTICAL LIFE
January 2014
Working Paper Number:
CES-14-05
Compensating wages for workplace fatality and accident risks are used to infer the value of a statistical life (VSL), which in turn is used to assess the benefits of human health and safety regulations. The estimation of these wage differentials, however, has been plagued by measurement error and omitted variables. This paper employs the first quasi-experimental design within a labor market setting to overcome such limitations in the ex-tant literature. Specifically, randomly assigned, exogenous federal safety inspections are used to instrument for plant-level risks and combined with confidential U.S. Census data on manufacturing employment to estimate the VSL using a difference-in-differences framework. The VSL is estimated to be between $2 and $4 million ($2011), suggesting prior studies may substantially overstate the value workers place on safety, and therefore, the benefits of health and safety regulations.View Full Paper PDF
-
Working PaperLEHD Data Documentation LEHD-OVERVIEW-S2008-rev1
December 2011
Working Paper Number:
CES-11-43
View Full Paper PDF
-
Working PaperNewly Recovered Microdata on U.S. Manufacturing Plants from the 1950s and 1960s: Some Early Glimpses
September 2011
Working Paper Number:
CES-11-29
Longitudinally-linked microdata on U.S. manufacturing plants are currently available to researchers for 1963, 1967, and 1972-2009. In this paper, we provide a first look at recently recovered manufacturing microdata files from the 1950s and 1960s. We describe their origins and background, discuss their contents, and begin to explore their sample coverage. We also begin to examine whether the available establishment identifier(s) allow record linking. Our preliminary analyses suggest that longitudinally-linked Annual Survey of Manufactures microdata from the mid-1950s through the present ' containing 16 years of additional data ' appears possible though challenging. While a great deal of work remains, we see tremendous value in extending the manufacturing microdata series back into time. With these data, new lines of research become possible and many others can be revisited.View Full Paper PDF
-
Working PaperUsing the Survey of Plant Capacity to Measure Capital Utilization
July 2011
Working Paper Number:
CES-11-19
Most capital in the United States is idle much of the time. By some measures, the average workweek of capital in U.S. manufacturing is as low as 55 hours per 168 hour week. The level and variability of capital utilization has important implications for understanding both the level of production and its cyclical fluctuations. This paper investigates a number of issues relating to aggregation of capital utilization measures from the Survey of Plant Capacity and makes recommendations on expanding and improving the published statistics deriving from the Survey of Plant Capacity. The paper documents a number of facts about properties of capital utilization. First, after growing for decades, capital utilization started to fall in mid 1990s. Second, capital utilization is a useful predictor of changes in capacity utilization and other factors of production. Third, adjustment of productivity measures for variable capital utilization improves statistical and economic properties of these measures. Fourth, the paper constructs weights to aggregate firm level capital utilization rates to industry and economy level, which is the major enhancement to available data.View Full Paper PDF
-
Working PaperLEHD Infrastructure Files in the Census RDC: Overview of S2004 Snapshot
April 2011
Working Paper Number:
CES-11-13
The Longitudinal Employer-Household Dynamics (LEHD) Program at the U.S. Census Bureau, with the support of several national research agencies, has built a set of infrastructure files using administrative data provided by state agencies, enhanced with information from other administrative data sources, demographic and economic (business) surveys and censuses. The LEHD Infrastructure Files provide a detailed and comprehensive picture of workers, employers, and their interaction in the U.S. economy. This document describes the structure and content of the 2004 Snapshot of the LEHD Infrastructure files as they are made available in the Census Bureau's Research Data Center network.View Full Paper PDF
-
Working PaperBuilding New Plants or Entering by Acquisition? Estimation of an Entry Model for the U.S. Cement Industry
April 2010
Working Paper Number:
CES-10-08
In many industries, firms usually have two choices when expanding into new markets: They can either build a new plant (greenfield entry) or they can acquire an existing incumbent. The U.S. cement industry is a clear example. For this industry, I study the effect of two policies on the entry behavior and industry equilibrium: An asymmetric environmental policy that creates barriers to greenfield entry and a policy that creates barriers to entry by acquisition (like an antitrust policy). In the U.S. cement industry, the comparative advantage (e.g., TFP or size) of entrants versus incumbents and the regulatory entry barriers are important factors that determine the means of expansion. To model this industry, I use a perfect information static entry game. To estimate the supply and demand primitives of my model, I apply a recent estimator of discrete games to a rich database of the U.S. Census of Manufactures for the years 1963-2002. In my counterfactual analyses, I find that a less favorable environment for mergers during the Reagan-Bush administration would decrease the acquired plants by 70% and increase the new plants by 20%. Also, I find that the Clean Air Act Amendments of 1990 increased the number of acquisitions by 7.8%. Furthermore, my simulations suggest that regulations that create barriers to greenfield entry are less favorable in terms of welfare than regulations that create barriers to entry by acquisition. Finally, I demonstrate how my parameter estimates change when I apply the traditional approach in the entry literature where entry by acquisition is not considered, and when using a simple OLS estimation.View Full Paper PDF
-
Working PaperThe Impact of Plant-Level Resource Reallocations and Technical Progress on U.S. Macroeconomic Growth
December 2009
Working Paper Number:
CES-09-43
We build up from the plant level an "aggregate(d) Solow residual" by estimating every U.S. manufacturing plant's contribution to the change in aggregate final demand between 1976 and 1996. We decompose these contributions into plant-level resource reallocations and plant-level technical efficiency changes. We allow for 459 different production technologies, one for each 4- digit SIC code. Our framework uses the Petrin and Levinsohn (2008) definition of aggregate productivity growth, which aggregates plant-level changes to changes in aggregate final demand in the presence of imperfect competition and other distortions and frictions. On average, we find that aggregate reallocation made a larger contribution than aggregate technical efficiency growth. Our estimates of the contribution of reallocation range from 1:7% to2:1% per year, while our estimates of the average contribution of aggregate technical efficiency growth range from 0:2% to 0:6% per year. In terms of cyclicality, the aggregate technical efficiency component has a standard deviation that is roughly 50% to 100% larger than that of aggregate total reallocation, pointing to an important role for technical efficiency in macroeconomic fluctuations. Aggregate reallocation is negative in only 3 of the 20 years of our sample, suggesting that the movement of inputs to more highly valued activities on average plays a stabilizing role in manufacturing growth.View Full Paper PDF
-
Working PaperThe Center for Economic Studies 1982-2007: A Brief History
October 2009
Working Paper Number:
CES-09-35
More than half a century ago, visionaries representing both the Census Bureau and the external research community laid the foundation for the Center for Economic Studies (CES) and the Research Data Center (RDC) system. They saw a clear need for a system meeting the inextricably related requirements of providing more and better information from existing Census Bureau data collections while preserving respondent confidentiality and privacy. CES opened in 1982 to house new longitudinal business databases, develop them further, and make them available to qualified researchers. CES and the RDC system evolved to meet the designers' requirements. Research at CES and the RDCs meets the commitments of the Census Bureau (and, recently, of other agencies) to preserving confidentiality while contributing paradigm-shifting fundamental research in a range of disciplines and up-to-the-minute critical tools for decision-makers.View Full Paper PDF
