Ready-to-Mix: Horizontal Mergers, Prices, and Productivity
January 2017
Working Paper Number:
CES-17-38
Abstract
I estimate the price and productivity effects of horizontal mergers in the ready-mix concrete industry using plant and firm-level data from the US Census Bureau. Horizontal mergers involving plants in close proximity are associated with price increases and decreases in output, but also raise productivity at acquired plants. While there is a significant negative relationship between productivity and prices, the rate at which productivity reduces price is modest and the effects of increased market power are not offset. I then present several additional new results of policy interest. For example, mergers are only observed leading to price increases after the relaxation of antitrust standards in the mid-1980s; price increases following mergers are persistent but tend to become smaller over time; and, there is evidence That firms target plants charging below average prices for acquisition. Finally, I use a simple multinomial logit demand model to assess the effects of merger activity on total welfare. At acquired plants, the consumer and producer surplus effects approximately cancel out, but effects at acquiring plants and non-merging plants, where prices also rise, cause a substantial decrease in consumer surplus.
Document Tags and Keywords
Keywords
Keywords are automatically generated using KeyBERT, a powerful and innovative
keyword extraction tool that utilizes BERT embeddings to ensure high-quality and contextually relevant
keywords.
By analyzing the content of working papers, KeyBERT identifies terms and phrases that capture the essence of the
text, highlighting the most significant topics and trends. This approach not only enhances searchability but
provides connections that go beyond potentially domain-specific author-defined keywords.
:
demand,
market,
economist,
endogeneity,
sale,
aggregate,
cost,
merger,
acquisition,
price,
endogenous,
expenditure,
economically,
pricing,
revenue,
buyer,
rate
Tags
Tags are automatically generated using a pretrained language model from spaCy, which excels at
several tasks, including entity tagging.
The model is able to label words and phrases by part-of-speech,
including "organizations." By filtering for frequent words and phrases labeled as "organizations", papers are
identified to contain references to specific institutions, datasets, and other organizations.
:
Total Factor Productivity,
Securities and Exchange Commission,
New York Times,
Bureau of Economic Analysis,
Federal Trade Commission,
Longitudinal Business Database,
Department of Justice,
Council of Economic Advisers,
TFPQ
Similar Working Papers
Similarity between working papers are determined by an unsupervised neural
network model
know as Doc2Vec.
Doc2Vec is a model that represents entire documents as fixed-length vectors, allowing for the
capture of semantic meaning in a way that relates to the context of words within the document. The model learns to
associate a unique vector with each document while simultaneously learning word vectors, enabling tasks such as
document classification, clustering, and similarity detection by preserving the order and structure of words. The
document vectors are compared using cosine similarity/distance to determine the most similar working papers.
Papers identified with 🔥 are in the top 20% of similarity.
The 10 most similar working papers to the working paper 'Ready-to-Mix: Horizontal Mergers, Prices, and Productivity' are listed below in order of similarity.
-
Working PaperMaterials Prices and Productivity
June 2012
Working Paper Number:
CES-12-11
There is substantial within-industry variation, even within industries that use and produce homogeneous inputs and outputs, in the prices that plants pay for their material inputs. I explore, using plant-level data from the U.S. Census Bureau, the consequences and sources of this variation in materials prices. For a sample of industries with relatively homogeneous products, the standard deviation of plant-level productivities would be 7% lower if all plants faced the same materials prices. Moreover, plant-level materials prices are both persistent across time and predictive of exit. The contribution of net entry to aggregate productivity growth is smaller for productivity measures that strip out di'erences in materials prices. After documenting these patterns, I discuss three potential sources of materials price variation: geography, di'erences in suppliers. marginal costs, and suppliers. price discriminatory behavior. Together, these variables account for 13% of the dispersion of materials prices. Finally, I demonstrate that plants.marginal costs are correlated with the marginal costs of their intermediate input suppliers.View Full Paper PDF
-
Working PaperProduct Quality and Firm Heterogeneity in International Trade
March 2013
Working Paper Number:
CES-13-08
I develop and implement a methodology for obtaining plant-level estimates of product quality from revenue and physical output data. Intuitively, firms that sell large quantities of output conditional on price are classified as high quality producers. I use this method to decompose cross-plant variation in price and export status into a quality and an efficiency margin. The empirical results show that prices are increasing in quality and decreasing in efficiency. However, selection into exporting is driven mainly by quality. The finding that changes in quality and efficiency have different impact on the firm's export decision is shown to be inconsistent with the traditional iceberg trade cost formulation and points to the importance of per unit transport costs.View Full Paper PDF
-
Working PaperEvidence for the Effects of Mergers on Market Power and Efficiency
January 2016
Working Paper Number:
CES-16-43
Study of the impact of mergers and acquisitions (M&As) on productivity and market power has been complicated by the difficulty of separating these two effects. We use newly-developed techniques to separately estimate productivity and markups across a wide range of industries using confidential data from the U.S. Census Bureau. Employing a difference-in-differences framework, we find that M&As are associated with increases in average markups, but find little evidence for effects on plant-level productivity. We also examine whether M&As increase efficiency through reallocation of production to more efficient plants or through reductions in administrative operations, but again find little evidence for these channels, on average. The results are robust to a range of approaches to address the endogeneity of firms' merger decisions.View Full Paper PDF
-
Working PaperPRODUCTIVITY, RESTRUCTURING, AND THE GAINS FROM TAKEOVERS
April 2013
Working Paper Number:
CES-13-18
This paper investigates how takeovers create value. Using plant-level data, I show that acquirers increase targets' productivity through more efficient use of capital and labor. Acquirers significantly reduce capital expenditures, wages, and employment in target plants, though output is unchanged. Acquirers improve targets'investment efficiency through better capital reallocation. Moreover, changes in productivity help explain the merging firms' announcement returns. The combined announcement returns are driven by improvements in target's productivity. Targets with greater productivity improvements receive higher premiums. These results provide some first empirical evidence on the relation between productivity and stock returns in the context of takeovers.View Full Paper PDF
-
Working PaperPlant Turnover and Demand Fluctuations in the Ready-Mix Concrete Industry
March 2006
Working Paper Number:
CES-06-08
Fluctuations in demand cause some plants to exit a market and other to enter. Would eliminating these 'uctuations reduce plant turnover? A structural model of entry and exit in concentrated markets is estimated for the ready-mix concrete industry, using plant level data from the U.S. Census. The Nested Pseudo-Likelihood algorithm is used to 'nd parameters which rationalize behavior of 'rms involved in repeated competition. Due to high sunk costs, turnover rates would only be reduced by 3% by eliminating demand 'uctuations at the county level, saving around 20 million dollars a year in scrapped capital. However, demand 'uctuations blunt 'rms'incentive to invest, reducing the number of large plants by more than 50%.View Full Paper PDF
-
Working PaperOlder and Slower: The Startup Deficit's Lasting Effects on Aggregate Productivity Growth
June 2018
Working Paper Number:
CES-18-29
We investigate the link between declining firm entry, aging incumbent firms and sluggish U.S. productivity growth. We provide a dynamic decomposition framework to characterize the contributions to industry productivity growth across the firm age distribution and apply this framework to the newly developed Revenue-enhanced Longitudinal Business Database (ReLBD). Overall, several key findings emerge: (i) the relationship between firm age and productivity growth is downward sloping and convex; (ii) the magnitudes are substantial and significant but fade quickly, with nearly 2/3 of the effect disappearing after five years and nearly the entire effect disappearing after ten; (iii) the higher productivity growth of young firms is driven nearly exclusively by the forces of selection and reallocation. Our results suggest a cumulative drag on aggregate productivity of 3.1% since 1980. Using an instrumental variables strategy we find a consistent pattern across states/MSAs in the U.S. The patterns are broadly consistent with a standard model of firm dynamics with monopolistic competition.View Full Paper PDF
-
Working PaperProductivity Dispersion and Plant Selection in the Ready-Mix Concrete Industry
September 2011
Working Paper Number:
CES-11-25
This paper presents a quantitative model of productivity dispersion to explain why inefficient producers are slowly selected out of the ready-mix concrete industry. Measured productivity dispersion between the 10th and 90th percentile falls from a 4 to 1 difference using OLS, to a 2 to 1 difference using a control function. Due to volatile productivity and high sunk entry costs, a dynamic oligopoly model shows that to rationalize small gaps in exit rates between high and low productivity plants, a plant in the top quintile must produce 1.5 times more than a plant in the bottom quintile.View Full Paper PDF
-
Working PaperPost-Merger Restructuring and the Boundaries of the Firm
April 2011
Working Paper Number:
CES-11-11
We examine how firms redraw their boundaries after acquisitions using plant-level data. We find that there is extensive restructuring in a short period following mergers and full-firm acquisitions. Acquirers of full firms sell 27% and close 19% of the plants of target firms within three years of the acquisition. Acquirers with skill in running their peripheral divisions tend to retain more acquired plants. Retained plants increase in productivity whereas sold plants do not. These results suggest that acquirers restructure targets in ways that exploit their comparative advantage.View Full Paper PDF
-
Working PaperFirm Dynamics, Persistent Effects of Entry Conditions, and Business Cycles
January 2017
Working Paper Number:
CES-17-29
This paper examines how the state of the economy when businesses begin operations affects their size and performance over the lifecycle. Using micro-level data that covers the entire universe of businesses operating in the U.S. since the late 1970s, I provide new evidence that businesses born in downturns start on a smaller scale and remain smaller over their entire lifecycle. In fact, I find no evidence that these differences attenuate even long after entry. Using new data on the productivity and composition of startup businesses, I show that this persistence is related to selection at entry and demand-side channels.View Full Paper PDF
-
Working PaperHas toughness of local competition declined?
May 2022
Working Paper Number:
CES-22-13
Recent evidence on rm-level markups and concentration raises a concern that market competition has declined in the U.S. over the last few decades. Since measuring competition is difficult, methodologies used to arrive at these findings have merits but also raise technical concerns which question the validity of these results. Given the significance of documenting how competition has changed, I contribute to this literature by studying a different measure of competition. Specifically, I estimate the toughness of local competition over time. To derive this estimate, I use a generalized monopolistic competition model with variable markups. This model generates insights that allows me to measure competition as the sensitivity of weighted-average markup to changes in the number of competitors using directly observable variables. Compared to firm-level markups estimation, this method relaxes the need to estimate production functions. I then use confidential Census data to estimate toughness of local competition from 1997 to 2016, which shows that local competition has decreased in non-tradable industries on average in the U.S. during this time period.View Full Paper PDF
