-
Automation and the Workforce: A Firm-Level View from the 2019 Annual Business Survey
April 2022
Authors:
John Haltiwanger,
Lucia Foster,
Emin Dinlersoz,
Nikolas Zolas,
Daron Acemoglu,
Catherine Buffington,
Nathan Goldschlag,
Zachary Kroff,
David Beede,
Gary Anderson,
Eric Childress,
Pascual Restrepo
Working Paper Number:
CES-22-12R
This paper describes the adoption of automation technologies by US firms across all economic sectors by leveraging a new module introduced in the 2019 Annual Business Survey, conducted by the US Census Bureau in partnership with the National Center for Science and Engineering Statistics (NCSES). The module collects data from over 300,000 firms on the use of five advanced technologies: AI, robotics, dedicated equipment, specialized software, and cloud computing. The adoption of these technologies remains low (especially for AI and robotics), varies substantially across industries, and concentrates on large and young firms. However, because larger firms are much more likely to adopt them, 12-64% of US workers and 22-72% of manufacturing workers are exposed to these technologies. Firms report a variety of motivations for adoption, including automating tasks previously performed by labor. Consistent with the use of these technologies for automation, adopters have higher labor productivity and lower labor shares. In particular, the use of these technologies is associated with a 11.4% higher labor productivity, which accounts for 20'30% of the difference in labor productivity between large firms and the median firm in an industry. Adopters report that these technologies raised skill requirements and led to greater demand for skilled labor, but brought limited or ambiguous effects to their employment levels.
View Full
Paper PDF
-
Advanced Technologies Adoption and Use by U.S. Firms: Evidence from the Annual Business Survey
December 2020
Working Paper Number:
CES-20-40
We introduce a new survey module intended to complement and expand research on the causes and consequences of advanced technology adoption. The 2018 Annual Business Survey (ABS), conducted by the Census Bureau in partnership with the National Center for Science and Engineering Statistics (NCSES), provides comprehensive and timely information on the diffusion among U.S. firms of advanced technologies including artificial intelligence (AI), cloud computing, robotics, and the digitization of business information. The 2018 ABS is a large, nationally representative sample of over 850,000 firms covering all private, nonfarm sectors of the economy. We describe the motivation for and development of the technology module in the ABS, as well as provide a first look at technology adoption and use patterns across firms and sectors. We find that digitization is quite widespread, as is some use of cloud computing. In contrast, advanced technology adoption is rare and generally skewed towards larger and older firms. Adoption patterns are consistent with a hierarchy of increasing technological sophistication, in which most firms that adopt AI or other advanced business technologies also use the other, more widely diffused technologies. Finally, while few firms are at the technology frontier, they tend to be large so technology exposure of the average worker is significantly higher. This new data will be available to qualified researchers on approved projects in the Federal Statistical Research Data Center network.
View Full
Paper PDF
-
The Management and Organizational Practices Survey (MOPS): An Overview*
January 2016
Working Paper Number:
CES-16-28
Understanding productivity and business dynamics requires measuring production outputs and inputs. Through its surveys and use of administrative data, the Census Bureau collects information on production outputs and inputs including labor, capital, energy, and materials. With the introduction of the Management and Organizational Practices Survey (MOPS), the Census Bureau added information on another component of production: management. It has long been hypothesized that management is an important component of firm success, but until recently the study of management was confined to hypotheses, anecdotes, and case studies. Building upon the work of Bloom and Van Reenen (2007), the first-ever large scale survey of management practices in the United States, the MOPS, was conducted by the Census Bureau for 2010. A second, enhanced version of the MOPS is being conducted for 2015. The enhancement includes two new topics related to management: data and decision making (DDD) and uncertainty. As information technology has expanded plants are increasingly able to utilize data in their decision making. Structured management practices have been found to be complementary to DDD in earlier studies. Uncertainty has policy implications because uncertainty is found to be associated with reduced investment and employment. Uncertainty also plays a role in the targeting component of management.
View Full
Paper PDF
-
The Impact of Information and Communication Technology Adoption on Multinational Firm Boundary Decisions
January 2016
Working Paper Number:
CES-16-01
This paper evaluates the effect of adopting internet-enabled information and communication technology (ICT) adoption on the decision to reorganize production across national borders (foreign boundary decision) by multinational enterprises (MNE). Using a transaction cost framework, we argue that ICT adoption influences foreign boundary decisions by lowering coordination costs both internally and externally for the firm. We propose that the heterogeneity in the technology's characteristics, namely complexity and the production processes' degree of codifiability, moderate this influence. Using a difference-in-differences methodology and exploiting the richness of confidential U.S. Census Bureau microdata, we find that overall ICT adoption is positively associated with greater likelihood of in-house production, as measured by increases in intra-firm trade shares. Furthermore, we find that more complex forms of ICT are associated with larger increases in intra-firm trade shares. Finally, our results indicate that MNEs in industries in which production specifications are more easily codified in an electronic format are less likely to engage in intra-firm relative to arms-length trade following ICT adoption.
View Full
Paper PDF
-
Technology and Production Fragmentation: Domestic versus Foreign Sourcing
January 2013
Working Paper Number:
CES-13-35R
This paper provides direct empirical evidence on the relationship between technology and firms' global sourcing strategies. Using new data on U.S. firms' decisions to contract for manufacturing services from domestic or foreign suppliers, I show that a firm's adoption of communication technology between 2002 to 2007 is associated with a 3.1 point increase in its probability of fragmentation. The effect of firm technology also differs significantly across industries; in 2007, it is 20 percent higher, relative to the mean, in industries with production specifications that are easier to codify in an electronic format. These patterns suggest that technology lowers coordination costs, though its effect is disproportionately higher for domestic rather than foreign sourcing. The larger impact on domestic fragmentation highlights its importance as an alternative to offshoring, and can be explained by complementarities between technology and worker skill. High technology firms and industries are more likely to source from high human capital countries, and the differential impact of technology across industries is strongly increasing in country human capital.
View Full
Paper PDF
-
Computer Networks and Productivity Revisited: Does Plant Size Matter? Evidence and Implications
September 2010
Working Paper Number:
CES-10-25
Numerous studies have documented a positive association between information technology (IT) investments and business- and establishment-level productivity, but these studies usually pay sole or disporportionate attention to small- or medium-sized entities. In this paper, we revisit the evidence for manufacturing plants presented in Atrostic and Nguyen (2005) and show that the positive relationship between computer networks and labor productivity is only found among small- and medium-sized plants. Indeed, for larger plants the relationship is negative, and employment-weighted estimates indicate computer networks have a negative relationship with the productivity of employees, on average. These findings indicate that computer network investments may have an ambiguous relationship with aggregate labor productivity growth.
View Full
Paper PDF
-
Electronic Networking Technologies, Innovation Misfit, and Plant Performance
February 2010
Working Paper Number:
CES-10-03
Prior work on information technology (IT) adoption and economic impacts typically employs an instrumental logic in which firms lead with innovation when they possess characteristics that make it economically beneficial to do so and lag when they do not. However, firms may deviate from this idealized picture when they possess characteristics of an innovation laggard but exhibit the behavior of an innovation leader (or vice versa), with implications for the returns to IT investment. This study develops a conceptual framework and hypotheses regarding the implications of such deviations, which we call innovation misfits. Using a data set comprising measures of the adoption of electronic networking technologies (ENT) in over 25,000 U.S. manufacturing plants, productivity regression estimation reveals a consistent pattern that the association between IT and productivity is diminished in the presence of innovation misfit. We discuss the implications of innovation misfit for scholarship and management practice, which are numerous.
View Full
Paper PDF
-
IT for Information-Based Partnerships: Empirical Analysis of Environmental Contingencies to Value Co-Creation
December 2009
Working Paper Number:
CES-09-42
We empirically examine IT value co-creation in supply chains, incorporating key contingencies of the competitive environment. Prior research suggests that IT used for strategic informationbased partnerships may benefit supply chains facing higher volatility, enabling tightly coupled integration and enhanced strategic response to changing consumer preferences. Analyzing a unique dataset comprising over 6,000 U.S. manufacturing plants, we obtain three principal results. First, value co-creation using either IT for strategic information-based partnerships (ITIP) or merely IT for transaction efficiency (ITT) is positive and significant. Second, the co-created value from ITIP is larger than that for (ITT), suggesting that information-based partnerships, while perhaps requiring a greater investment, yield a higher return. Third and most importantly, co-created value from using IT for information-based partnerships is positively moderated by demand volatility, i.e., value is greater in higher demand volatility environments. However, we find the opposite is true for using IT for efficient transactions. This is a new contribution to the literature and has important theoretical and practical implications.
View Full
Paper PDF
-
Computer Network Use and Firms' Productivity Performance: The United States vs. Japan
September 2008
Working Paper Number:
CES-08-30
This paper examines the relationship between computer network use and firms' productivity performance, using micro-data of the United States and Japan. To our knowledge, this is the first comparative analysis using firm-level data for the manufacturing sector of both countries. We find that the links between IT and productivity differ between U.S. and Japanese manufacturing. Computer networks have positive and significant links with labor productivity in both countries. However, that link is roughly twice as large in the U.S. as in Japan. Differences in how businesses use computers have clear links with productivity for U.S. manufacturing, but not in Japan. For the United States, the coefficients of the intensity of network use are positive and increase with the number of processes. Coefficients of specific uses of those networks are positive and significant. None of these coefficients are significant for Japan. Our findings are robust to alternative econometric specifications. They also are robust to expanding our sample from single-unit manufacturing firms, which are comparable in the two data sets, to the entire manufacturing sector in each country, as well as to the wholesale and retail sector of Japan.
View Full
Paper PDF
-
Measuring U.S. Innovative Activity
March 2007
Working Paper Number:
CES-07-11
Innovation has long been credited as a leading source of economic strength and vitality in the United States because it leads to new goods and services and increases productivity, leading to better living standards. Better measures of innovative activities'activities including but not limited to innovation alone'could improve what we know about the sources of productivity and economic growth. The U.S. Census Bureau either currently collects, or has collected, data on some measures of innovative activities, such as the diffusion of innovations and technologies, human and organizational capital, entrepreneurship and other worker and firm characteristics, and the entry and exit of businesses, that research shows affect productivity and other measures of economic performance. But developing an understanding of how those effects work requires more than just measures of innovative activity. It also requires solid statistical information about core measures of the economy: that is, comprehensive coverage of all industries, including improved measures of output and sales and additional information on inputs and purchased materials at the micro (enterprise) level for the same economic unit over time (so the effects can be measured). Filling gaps in core data would allow us to rule out the possibility that a measure of innovative activity merely proxies for something that is omitted from or measured poorly in the core data, provide more information about innovative activities, and strengthen our ability to evaluate the performance of the entire economy. These gaps can be filled by better integrating existing data and by more structured collections of new data.
View Full
Paper PDF
