-
Addressing Data Gaps:
Four New Lines of Inquiry in the 2017 Economic Census
September 2019
Working Paper Number:
CES-19-28
We describe four new lines of inquiry added to the 2017 Economic Census regarding (i) retail health clinics, (ii) management practices in health care services, (iii) self-service in retail and service industries, and (iv) water use in manufacturing and mining industries. These were proposed by economists from the U.S. Census Bureau's Center for Economic Studies in order to fill data gaps in current Census Bureau products concerning the U.S. economy. The new content addresses such issues as the rise in importance of health care and its complexity, the adoption of automation technologies, and the importance of measuring water, a critical input to many manufacturing and mining industries.
View Full
Paper PDF
-
Water Use and Conservation in Manufacturing:
Evidence from U.S. Microdata
June 2015
Working Paper Number:
CES-15-16R
Water can be a scarce resource, particularly in certain places at certain times. Understanding both water use and conservation efforts can help ensure that limited supplies can meet the demands of a growing population and economy. This paper examines water use and recirculation in the U.S. manufacturing sector, using newly recovered microdata from the Survey of Water Use in Manufacturing, merged with establishment-level data from the Annual Survey of Manufactures and the Census of Manufactures. Results suggest that water use per unit of output is largest for larger establishments, in part because larger establishments use water for more purposes. Larger establishments are also found to recirculate water more ' satisfying demand (water use) without necessarily increasing water intake. Various costs also appear to play a role in water recirculation. In particular, the water circulation rate is found to be higher when water is purchased from a utility. Relatively low (internal) prices for self-supplied water could suppress the incentive to invest in recirculation. Meanwhile, establishments with higher per-gallon intake treatment costs also recirculate more, as might be expected. The cost associated with water discharge ' due to regulation or otherwise ' also increases circulation rates. The aridity of a locale is found to have little effect on circulation rates.
View Full
Paper PDF
-
Do Environmental Regulations Disproportionately Affect Small Businesses? Evidence from the Pollution Abatement Costs and Expenditures Survey
September 2012
Working Paper Number:
CES-12-25R
It remains an open question whether the impact of environmental regulations differs by the size of the business. Such differences might be expected because of statutory, enforcement, and/or compliance asymmetries. Here, we consider the net effect of these three asymmetries, by estimating the relationship between plant size and pollution abatement expenditures, using establishment-level data on U.S. manufacturers from the Census Bureau's Pollution Abatement Costs and Expenditures (PACE) surveys of 1974-1982, 1984-1986, 1988-1994, 1999, and 2005, combined with data from the Annual Survey of Manufactures and Census of Manufactures. We model establishments' PAOC intensity - that is, their pollution abatement operating costs per unit of economic activity - as a function of establishment size, industry, and year. Our results show that PAOC intensity increases with establishment size. We also find that larger firms spend more per unit of output than do smaller firms.
View Full
Paper PDF
-
Newly Recovered Microdata on U.S. Manufacturing Plants from the 1950s and 1960s: Some Early Glimpses
September 2011
Working Paper Number:
CES-11-29
Longitudinally-linked microdata on U.S. manufacturing plants are currently available to researchers for 1963, 1967, and 1972-2009. In this paper, we provide a first look at recently recovered manufacturing microdata files from the 1950s and 1960s. We describe their origins and background, discuss their contents, and begin to explore their sample coverage. We also begin to examine whether the available establishment identifier(s) allow record linking. Our preliminary analyses suggest that longitudinally-linked Annual Survey of Manufactures microdata from the mid-1950s through the present ' containing 16 years of additional data ' appears possible though challenging. While a great deal of work remains, we see tremendous value in extending the manufacturing microdata series back into time. With these data, new lines of research become possible and many others can be revisited.
View Full
Paper PDF
-
Local Environmental Regulation and Plant-Level Productivity
September 2010
Working Paper Number:
CES-10-30R
This paper examines the impact of environmental regulation on the productivity of manufacturing plants in the United States. Establishment-level data from three Censuses of Manufactures are used to estimate 3-factor Cobb-Douglas production functions that include a measure of the stringency of environmental regulation faced by manufacturing plants. In contrast to previous studies, this paper examines effects on plants in all manufacturing industries, not just those in 'dirty' industries. Further, this paper employs spatial-temporal variation in environmental compliance costs to identify effects, using a time-varying county-level index that is based on multiple years of establishment-level data from the Pollution Abatement Costs and Expenditures survey and the Annual Survey of Manufactures. Results suggest that, for the average manufacturing plant, the effect on productivity of being in a county with higher environmental compliance costs is relatively small and often not statistically significant. For the average plant, the main effect of environmental regulation may not be in the spatial and temporal dimensions.
View Full
Paper PDF
-
U.S. Trade in Toxics: The Case of Chlorodifluoromethane (HCFC-22)
September 2009
Working Paper Number:
CES-09-29
This paper explores whether environmental regulation affects where pollution-intensive goods are produced. Here we examine chlorodifluoromethane (HCFC-22), a chemical designated as toxic in 1994 by the U.S. Environmental Protection Agency's Toxics Release Inventory (TRI). Trends show a decline in the number of domestic producers of this chemical, a decline in the number of manufacturing facilities using it, and an increase in the number (and share) of facilities claiming to import it. Transaction-level trade data show an increase in the import of HCFC-22 imports since its TRI listing ' an increase that is faster than that of all non-TRI listed chemicals. This is suggestive of a pollution haven effect. Meanwhile, we find that the vast majority of U.S. imports of HCFC-22 come from OECD countries. However, an increase in the share of imports from non-OECD countries since the chemical's listing suggests a shift of production to countries with more lax environmental standards. While the findings here are suggestive of regulatory effects, more rigorous analyses are needed to rule out other possible explanations.
View Full
Paper PDF
-
On Spatial Heterogeneity in Environmental Compliance Costs
September 2009
Working Paper Number:
CES-09-25R
This paper examines the extent of variation in regulatory stringency below the state level, using establishment-level data from the U.S. Census Bureau's Pollution Abatement Costs and Expenditures (PACE) survey to estimate a county-level index of environmental compliance costs (ECC). County-level variation is found to explain 11-18 times more of the variation in ECC than state-level variation alone, and the range of ECC within a state is often large. At least 34% of U.S. counties have ECC that are statistically different from their states'. Results suggest that important spatial variation is lost in state-level studies of environmental regulation.
View Full
Paper PDF
-
The Green Industry: An Examination of Environmental Products Manufacturing
September 2008
Working Paper Number:
CES-08-34
The "green industry" is often noted in discussions of the costs and benefits of environmental policy, and it has been characterized as a unique industry with substantial potential for employment growth, well-paying jobs, and export opportunities. In this paper, we examine the characteristics and recent economic performance of the green industry, using establishment-level data on environmental products manufacturers (EPMs) from the 1995 Survey of Environmental Products and Services, together with data from the Annual Survey of Manufactures and various Census of Manufactures. Results suggest that there are some differences between EPMs and their non-EPM counterparts in the same industry, in terms of employment, employee compensation, exports, and productivity. However, we do not find any evidence that EPMs performed any better than otherwise similar plants, in terms of survival, employment growth, wage growth, and export growth. Our findings offer a more complex and nuanced portrayal of the green industry than is typical, and we suggest that this industry may not be as exceptional as is sometimes maintained.
View Full
Paper PDF
-
Issues and Challenges in Measuring Environmental Expenditures by U.S. Manufacturing: The Redevelopment of the PACE Survey
July 2007
Working Paper Number:
CES-07-20
The Pollution Abatement Costs and Expenditures (PACE) survey is the most comprehensive source of information on U.S. manufacturing's capital expenditures and operating costs associated with pollution abatement. In 2003, the U.S. Environmental Protection Agency began a significant initiative to redevelop the survey, guided by the advice of a multi-disciplinary workgroup consisting of economists, engineers, survey design experts, and experienced data users, in addition to incorporating feedback from key manufacturing industries. This paper describes some of these redevelopment efforts. Issues discussed include the approach to developing the new survey instrument, methods used to evaluate (and improve) its performance, innovations in sampling, and the special development and role of outside expertise. The completely redesigned PACE survey was first administered in early 2006.
View Full
Paper PDF
-
Micro and Macro Data Integration: The Case of Capital
May 2005
Working Paper Number:
CES-05-02
Micro and macro data integration should be an objective of economic measurement as it is clearly advantageous to have internally consistent measurement at all levels of aggregation ' firm, industry and aggregate. In spite of the apparently compelling arguments, there are few measures of business activity that achieve anything close to micro/macro data internal consistency. The measures of business activity that are arguably the worst on this dimension are capital stocks and flows. In this paper, we document, quantify and analyze the widely different approaches to the measurement of capital from the aggregate (top down) and micro (bottom up) perspectives. We find that recent developments in data collection permit improved integration of the top down and bottom up approaches. We develop a prototype hybrid method that exploits these data to improve micro/macro data internal consistency in a manner that could potentially lead to substantially improved measures of capital stocks and flows at the industry level. We also explore the properties of the micro distribution of investment. In spite of substantial data and associated measurement limitations, we show that the micro distributions of investment exhibit properties that are of interest to both micro and macro analysts of investment behavior. These findings help highlight some of the potential benefits of micro/macro data integration.
View Full
Paper PDF
