CREAT: Census Research Exploration and Analysis Tool

Evaluation And Use Of The Pollution Abatement Costs And Expenditures Survey Micro Data

January 1996

Abstract

Document Tags and Keywords

Similar Working Papers Similarity between working papers are determined by an unsupervised neural network model know as Doc2Vec.

Doc2Vec is a model that represents entire documents as fixed-length vectors, allowing for the capture of semantic meaning in a way that relates to the context of words within the document. The model learns to associate a unique vector with each document while simultaneously learning word vectors, enabling tasks such as document classification, clustering, and similarity detection by preserving the order and structure of words. The document vectors are compared using cosine similarity/distance to determine the most similar working papers. Papers identified with 🔥 are in the top 20% of similarity.

The 10 most similar working papers to the working paper 'Evaluation And Use Of The Pollution Abatement Costs And Expenditures Survey Micro Data' are listed below in order of similarity.

• Working Paper

  🔥

  
  
  Issues and Challenges in Measuring Environmental Expenditures by U.S. Manufacturing: The Redevelopment of the PACE Survey
  

  July 2007

  Authors: Ronald J Shadbegian, Randy Becker

  Working Paper Number:

  CES-07-20

  The Pollution Abatement Costs and Expenditures (PACE) survey is the most comprehensive source of information on U.S. manufacturing's capital expenditures and operating costs associated with pollution abatement. In 2003, the U.S. Environmental Protection Agency began a significant initiative to redevelop the survey, guided by the advice of a multi-disciplinary workgroup consisting of economists, engineers, survey design experts, and experienced data users, in addition to incorporating feedback from key manufacturing industries. This paper describes some of these redevelopment efforts. Issues discussed include the approach to developing the new survey instrument, methods used to evaluate (and improve) its performance, innovations in sampling, and the special development and role of outside expertise. The completely redesigned PACE survey was first administered in early 2006.
  View Full Paper PDF

  ---

• Working Paper

  
  
  A Change of PACE: Comparing the 1994 and 1999 Pollution Abatement Costs and Expenditures Surveys
  

  July 2004

  Authors: Ronald J Shadbegian, Randy Becker

  Working Paper Number:

  CES-04-09

  Since 1973, the Pollution Abatement Costs and Expenditures (PACE) survey has been the principle source of information on U.S. industries' capital expenditure and operating costs associated with pollution abatement efforts. The PACE survey was discontinued after 1994 and then revived in 1999 for one year ' in a substantially different form than the preceding surveys however, making longitudinal analysis quite difficult. Conceptual differences include matters as fundamental as the scope and meaning of pollution abatement as well as the definition of operating costs. A number of other critical changes also exist, including ones of industrial coverage and sample selection. This paper is the first comprehensive effort to document the many changes in the PACE survey across these years and to provide a detailed guide for researchers and policymakers who wish to compare the 1994 and 1999 data. Overall, we find a 27% decline in environmental spending by the manufacturing sector between these two years, though there appears to be significant heterogeneity across industries. We discuss potential reasons for this dramatic decline, focusing mainly on issues of survey methodology and design. This paper should help inform current efforts to redevelop the PACE survey and re-establish it as a regular, annual survey.
  View Full Paper PDF

  ---

• Working Paper

  
  
  Newly Recovered Microdata on U.S. Manufacturing Plants from the 1950s and 1960s: Some Early Glimpses
  

  September 2011

  Authors: Randy Becker, Cheryl Grim

  Working Paper Number:

  CES-11-29

  Longitudinally-linked microdata on U.S. manufacturing plants are currently available to researchers for 1963, 1967, and 1972-2009. In this paper, we provide a first look at recently recovered manufacturing microdata files from the 1950s and 1960s. We describe their origins and background, discuss their contents, and begin to explore their sample coverage. We also begin to examine whether the available establishment identifier(s) allow record linking. Our preliminary analyses suggest that longitudinally-linked Annual Survey of Manufactures microdata from the mid-1950s through the present ' containing 16 years of additional data ' appears possible though challenging. While a great deal of work remains, we see tremendous value in extending the manufacturing microdata series back into time. With these data, new lines of research become possible and many others can be revisited.
  View Full Paper PDF

  ---

• Working Paper

  
  
  Do Environmental Regulations Disproportionately Affect Small Businesses? Evidence from the Pollution Abatement Costs and Expenditures Survey
  

  September 2012

  Authors: Ronald J Shadbegian, Randy Becker, Carl Pasurka, Jr.

  Working Paper Number:

  CES-12-25R

  It remains an open question whether the impact of environmental regulations differs by the size of the business. Such differences might be expected because of statutory, enforcement, and/or compliance asymmetries. Here, we consider the net effect of these three asymmetries, by estimating the relationship between plant size and pollution abatement expenditures, using establishment-level data on U.S. manufacturers from the Census Bureau's Pollution Abatement Costs and Expenditures (PACE) surveys of 1974-1982, 1984-1986, 1988-1994, 1999, and 2005, combined with data from the Annual Survey of Manufactures and Census of Manufactures. We model establishments' PAOC intensity - that is, their pollution abatement operating costs per unit of economic activity - as a function of establishment size, industry, and year. Our results show that PAOC intensity increases with establishment size. We also find that larger firms spend more per unit of output than do smaller firms.
  View Full Paper PDF

  ---

• Working Paper

  
  
  Air Pollution Abatement Costs Under the Clean Air Act: Evidence from the PACE Survey
  

  December 2001

  Authors: Randy Becker

  Working Paper Number:

  CES-01-12

  This paper uses establishment-level data from the U.S. Census Bureau's Pollution Abatement Costs and Expenditures (PACE) survey to investigate the effects of air quality regulation on the air pollution abatement capital expenditures and operating costs of manufacturing plants from 1979-1988. Results, based on some 90,000 observations, show that heavy emitters of the 'criteria' air pollutants (covered under the Clean Air Act) had significantly larger APA costs, and those subject to greater 'local' regulation (due to county NAAQS non-attainment) had expenditures that were greater still. The local regulation of a particular air pollutant generally resulted in hundreds of thousands of dollars (or more) of additional costs, with larger establishments and capital expenditures disproportionately affected. Federal and state environmental standards appear to have played a notable role, particularly in industries producing chemicals, petroleum, primary metals, and nonmetallic minerals. The findings of this paper support those of several recent studies.
  View Full Paper PDF

  ---

• Working Paper

  
  
  Water Use and Conservation in Manufacturing: Evidence from U.S. Microdata
  

  June 2015

  Authors: Randy Becker

  Working Paper Number:

  CES-15-16R

  Water can be a scarce resource, particularly in certain places at certain times. Understanding both water use and conservation efforts can help ensure that limited supplies can meet the demands of a growing population and economy. This paper examines water use and recirculation in the U.S. manufacturing sector, using newly recovered microdata from the Survey of Water Use in Manufacturing, merged with establishment-level data from the Annual Survey of Manufactures and the Census of Manufactures. Results suggest that water use per unit of output is largest for larger establishments, in part because larger establishments use water for more purposes. Larger establishments are also found to recirculate water more ' satisfying demand (water use) without necessarily increasing water intake. Various costs also appear to play a role in water recirculation. In particular, the water circulation rate is found to be higher when water is purchased from a utility. Relatively low (internal) prices for self-supplied water could suppress the incentive to invest in recirculation. Meanwhile, establishments with higher per-gallon intake treatment costs also recirculate more, as might be expected. The cost associated with water discharge ' due to regulation or otherwise ' also increases circulation rates. The aridity of a locale is found to have little effect on circulation rates.
  View Full Paper PDF

  ---

• Working Paper

  
  
  The Census of Construction Industries Database
  

  August 1998

  Authors: Mark A Calabria

  Working Paper Number:

  CES-98-10

  The Census of Construction Industries (CCI) is conducted every five years as part of the quinquennial Economic Census. The Census of Construction Industries covers all establishments with payroll that are engaged primarily in contract construction or construction on their own account for sale as defined in the Standard Industrial Classification Manual. As previously administered, the CCI is a partial census including all multi-establishments and all establishments with payroll above $480,000, one out of every five establishments with payroll between $480,000 and $120,000 and one out of eight remaining establishments. The resulting database contains for each year approximately 200,000 establishments in the building construction, heavy construction and special trade construction industrial classifications. This paper compares the content, survey procedures, and sample response of the 1982, 1987 and 1992 Censuses of Construction.
  View Full Paper PDF

  ---

• Working Paper

  
  
  Local Environmental Regulation and Plant-Level Productivity
  

  September 2010

  Authors: Randy Becker

  Working Paper Number:

  CES-10-30R

  This paper examines the impact of environmental regulation on the productivity of manufacturing plants in the United States. Establishment-level data from three Censuses of Manufactures are used to estimate 3-factor Cobb-Douglas production functions that include a measure of the stringency of environmental regulation faced by manufacturing plants. In contrast to previous studies, this paper examines effects on plants in all manufacturing industries, not just those in 'dirty' industries. Further, this paper employs spatial-temporal variation in environmental compliance costs to identify effects, using a time-varying county-level index that is based on multiple years of establishment-level data from the Pollution Abatement Costs and Expenditures survey and the Annual Survey of Manufactures. Results suggest that, for the average manufacturing plant, the effect on productivity of being in a county with higher environmental compliance costs is relatively small and often not statistically significant. For the average plant, the main effect of environmental regulation may not be in the spatial and temporal dimensions.
  View Full Paper PDF

  ---

• Working Paper

  
  
  Environmental Regulation And Manufacturing Productivity At The Plant Level
  

  March 1993

  Authors: Wayne B Gray, Ronald J Shadbegian

  Working Paper Number:

  CES-93-06

  This paper presents results for an analysis of plant-level data from three manufacturing industries (paper, oil, and steel). We combine productivity data from the Longitudinal Research Database ( LRD ) with pollution abatement expenditures from the Census Bureau's Pollution Abatement Cost and Expenditures (PACE) survey, as well as regulatory measures taken from datasets maintained by the Environmental Protection Agency. We use data from 1979 to 1985, considering both labor and total factor productivity, both levels and growth rates, and both annual measures and averages over the period. We find a strong connection between regulation and productivity when regulation is measured by compliance costs. More regulated plants have significantly lower productivity levels and slower productivity growth rates than less regulated plants. The magnitude of the impacts are larger than expected: a $1 increase in compliance costs appears to reduce TFP by the equivalent of $3 to $4. Thus, commonly used methods of calculating the impact of regulation on productivity are substantially underestimated. These results are generally consistent across industries and for different estimation methods. Our other measures of regulation (compliance status, enforcement activity, and emissions) show much less consistent results. Higher enforcement, lower compliance, and higher emissions are generally associated with lower productivity levels and slower productivity growth, but the coefficients are rarely significant.
  View Full Paper PDF

  ---

• Working Paper

  
  
  A Guide To R&D Data At The Center For Economic Studies U.S. Bureau Of THe Census
  

  August 1994

  Authors: Suzanne Peck, James D Adams

  Working Paper Number:

  CES-94-09

  The National Science Foundation R&D Survey is an annual survey of firms' research and development expenditures. The survey covers 3000 firms reporting positive R&D. This paper provides a description of the R&D data available at the Center for Economic Studies (CES). The most basic data series available contains the original survey R&D data. It covers the years 1972-92. The remaining two series, although derived from the original files, specialize in particular items. The Mandatory Series contains required survey items for the years 1973-88. Items reported at firms' discretion are in the Voluntary Series, which covers the years 1974-89. Both of the derived series incorporate flags that track quality of the data. Both also include corrections to the data based on original hard copy survey evidence stored at CES. In addition to describing each dataset, we offer suggestions to researchers wishing to use the R&D data in exploring various economic issues. We report selected response rates, discuss the survey design, and provide hints on how to use the data.
  View Full Paper PDF

  ---