This paper studies capital adjustment at the establishment level. Our goal is to characterize capital adjustment costs, which are important for understanding both the dynamics of aggregate investment and the impact of various policies on capital accumulation. Our estimation strategy searches for parameters that minimize ex post errors in an Euler equation. This strategy is quite common in models for which adjustment occurs in each period. Here, we extend that logic to the estimation of parameters of dynamic optimization problems in which non-convexities lead to extended periods of investment inactivity. In doing so, we create a method to take into account censored observations stemming from intermittent investment. This methodology allows us to take the structural model directly to the data, avoiding time-consuming simulation based methods. To study the effectiveness of this methodology, we first undertake several Monte Carlo exercises using data generated by the structural model. We then estimate capital adjustment costs for U.S. manufacturing establishments in two sectors.
-
The Dynamics of Plant-Level Productivity in U.S. Manufacturing
July 2006
Working Paper Number:
CES-06-20
Using a unique database that covers the entire U.S. manufacturing sector from 1976 until 1999, we estimate plant-level total factor productivity for a large number of plants. We characterize time series properties of plant-level idiosyncratic shocks to productivity, taking into account aggregate manufacturing-sector shocks and industry-level shocks. Plant-level heterogeneity and shocks are a key determinant of the cross-sectional variations in output. We compare the persistence and volatility of the idiosyncratic plant-level shocks to those of aggregate productivity shocks estimated from aggregate data. We find that the persistence of plant level shocks is surprisingly low-we estimate an average autocorrelation of the plantspecific productivity shock of only 0.37 to 0.41 on an annual basis. Finally, we find that estimates of the persistence of productivity shocks from aggregate data have a large upward bias. Estimates of the persistence of productivity shocks in the same data aggregated to the industry level produce autocorrelation estimates ranging from 0.80 to 0.91 on an annual basis. The results are robust to the inclusion of various measures of lumpiness in investment and job flows, different weighting methods, and different measures of the plants' capital stocks.
View Full
Paper PDF
-
The Cyclicality of Productivity Dispersion
May 2011
Working Paper Number:
CES-11-15
Using plant-level data, I show that the dispersion of total factor productivity in U.S. durable manufacturing is greater in recessions than in booms. This cyclical property of productivity dispersion is much less pronounced in non-durable manufacturing. In durables, this phenomenon primarily reflects a relatively higher share of unproductive firms in a recession. In order to interpret these findings, I construct a business cycle model where production in durables requires a fixed input. In a boom, when the market price of this fixed input is high, only more productive firms enter and only more productive incumbents survive, which results in a more compressed productivity distribution. The resulting higher average productivity in durables endogenously translates into a lower average relative price of durables. Additionally, my model is consistent with the following business cycle facts: procyclical entry, procyclical aggregate total factor productivity, more procyclicality in durable than non-durable output, procyclical employment and countercyclicality in the relative price of durables and the cross section of stock returns.
View Full
Paper PDF
-
Entry, Exit, and Plant-Level Dynamics over the Business Cycle
June 2008
Working Paper Number:
CES-08-17
This paper analyzes the implications of plant-level dynamics over the business cycle. We first document basic patterns of entry and exit of U.S. manufacturing plants, in terms of employment and productivity, between 1972 and 1997. We show how entry and exit patterns vary during the business cycle, and that the cyclical pattern of entry is very different from the cyclical pattern of exit. Second, we build a general equilibrium model of plant entry, exit, and employment and compare its predictions to the data. In our model, plants enter and exit endogenously, and the size and productivity of entering and exiting plants are also determined endogenously. Finally, we explore the policy implications of the model. Imposing a firing tax that is constant over time can destabilize the economy by causing fluctuations in the entry rate. Entry subsidies are found to be effective in stabilizing the entry rate and output.
View Full
Paper PDF
-
Compositional Nature of Firm Growth and Aggregate Fluctuations
March 2020
Working Paper Number:
CES-20-09
This paper studies firm dynamics over the business cycle. I present evidence from the United Kingdom that more rapidly growing firms are born in expansions than in recessions. Using administrative records from Census data, I find that this observation also holds for the last four recessions in the United States. I also present suggestive evidence that financial frictions play an important role in determining the types of firms that are born at different stages of the business cycle. I then develop a general equilibrium model in which firms choose their managers' span of control at birth. Firms that choose larger spans of control grow faster and eventually get to be larger, and in this sense have a larger target size. Financial frictions in the form of collateral constraints slow the rate at which firms reach their target size. It takes firms longer to get up to scale when collateral constraints tighten; therefore, businesses with the largest target size are affected disproportionately more. Thus, fewer entrepreneurs find it profitable to choose larger projects when financial conditions deteriorate. Using Bayesian methods, I estimate the model using micro and aggregate data from the United Kingdom. I find that financial shocks account for over 80% of fluctuations in the formation of businesses with a large target size, and TFP and labor wedge shocks account for the remaining 20%. An independently estimated version of the model with no choice over the span of control needs larger aggregate shocks in order to account for the same data series, suggesting that the intensive margin of business formation is important at business cycle frequencies. The model with the choice over the span of control generates an empirically relevant and non-targeted collapse in the right tail of the cumulative growth distribution among firms started in recessions, while the model without such a choice does not. The paper also discusses implications for micro-targeted government stimulus policies.
View Full
Paper PDF
-
Misallocation or Mismeasurement?
February 2020
Working Paper Number:
CES-20-07
The ratio of revenue to inputs differs greatly across plants within countries such as the U.S. and India. Such gaps may reflect misallocation which hinders aggregate productivity. But differences in measured average products need not reflect differences in true marginal products. We propose a way to estimate the gaps in true marginal products in the presence of measurement error. Our method exploits how revenue growth is less sensitive to input growth when a plant's average products are overstated by measurement error. For Indian manufacturing from 1985'2013, our correction lowers potential gains from reallocation by 20%. For the U.S. the effect is even more dramatic, reducing potential gains by 60% and eliminating 2/3 of a severe downward trend in allocative efficiency over 1978'2013.
View Full
Paper PDF
-
MISCLASSIFICATION IN BINARY CHOICE MODELS
May 2013
Working Paper Number:
CES-13-27
We derive the asymptotic bias from misclassification of the dependent variable in binary choice models. Measurement error is necessarily non-classical in this case, which leads to bias in linear and non-linear models even if only the dependent variable is mismeasured. A Monte Carlo study and an application to food stamp receipt show that the bias formulas are useful to analyze the sensitivity of substantive conclusions, to interpret biased coefficients and imply features of the estimates that are robust to misclassification. Using administrative records linked to survey data as validation data, we examine estimators that are consistent under misclassification. They can improve estimates if their assumptions hold, but can aggravate the problem if the assumptions are invalid. The estimators differ
in their robustness to such violations, which can be improved by incorporating additional information. We propose tests for the presence and nature of misclassification that can help to choose an estimator.
View Full
Paper PDF
-
Industrial Investments in Energy Efficiency: A Good Idea?
January 2017
Working Paper Number:
CES-17-05
Yes, from an energy-saving perspective. No, once we factor in the negative output and productivity adoption effects. These are the main conclusions we reach by conducting the first large-scale study on cogeneration technology adoption ' a prominent form of energy-saving investments ' in the U.S. manufacturing sector, using a sample that runs from 1982 to 2010 and drawing on multiple data sources from the U.S. Census Bureau and the U.S. Energy Information Administration. We first show through a series of event studies that no differential trends exist in energy consumption nor production activities between adopters and never-adopters prior to the adoption event. We then compute a distribution of realized returns to energy savings, using accounting methods and regression methods, based on our difference-in-difference estimator. We find that (1) significant heterogeneity exists in returns; (2) unlike previous studies in the residential sector, the realized and projected returns to energy savings are roughly consistent in the industrial sector, for both private and social returns; (3) however, cogeneration adoption decreases manufacturing output and productivity persistently for at least the next 7-10 years, relative to the control group. Our IV strategies also show sizable decline in TFP post adoption.
View Full
Paper PDF
-
Leasing, Ability to Repossess, and Debt Capacity
June 2007
Working Paper Number:
CES-07-19
This paper studies the financing role of leasing and secured lending. We argue that the benefit of leasing is that repossession of a leased asset is easier than foreclosure on the collateral of a secured loan, which implies that leasing has higher debt capacity than secured lending. However, leasing involves agency costs due to the separation of ownership and control. More financially constrained firms value the additional debt capacity more and hence lease more of their capital than less constrained firms. We provide empirical evidence consistent with this prediction. Our theory is consistent with the explanation of leasing by practitioners, namely that leasing "preserves capital," which the academic literature considers a fallacy.
View Full
Paper PDF
-
Evidence for the Effects of Mergers on Market Power and Efficiency
January 2016
Working Paper Number:
CES-16-43
Study of the impact of mergers and acquisitions (M&As) on productivity and market power has been complicated by the difficulty of separating these two effects. We use newly-developed techniques to separately estimate productivity and markups across a wide range of industries using confidential data from the U.S. Census Bureau. Employing a difference-in-differences framework, we find that M&As are associated with increases in average markups, but find little evidence for effects on plant-level productivity. We also examine whether M&As increase efficiency through reallocation of production to more efficient plants or through reductions in administrative operations, but again find little evidence for these channels, on average. The results are robust to a range of approaches to
address the endogeneity of firms' merger decisions.
View Full
Paper PDF
-
The Cross-Section of Labor Leverage and Equity Returns*
January 2017
Working Paper Number:
CES-17-70
We study labor-induced operating leverage. Theoretically, we show that if labor markets are frictionless, two sufficient conditions for the existence of labor leverage are (a) relatively smooth wages and (b) a capital-labor elasticity of substitution strictly less than one. Our model provides theoretical support for the use of labor share'the ratio of labor expenses to value added'as a measure of labor leverage. We provide evidence for conditions (a) and (b), and we demonstrate the economic significance of labor leverage: High labor-share firms have operating profits that are more sensitive to economic shocks and have higher expected returns.
View Full
Paper PDF