When Do Firms Shift Production Across States to Avoid Environmental Regulation?
December 2001
Working Paper Number:
CES-01-18
Abstract
This paper examines whether a firm's allocation of production across its plants responds to the environmental regulation faced by those plants, as measured by differences in stringency across states. We also test whether sensitivity to regulation differs based on differences across firms in compliance behavior and/or differences across states in industry importance and concentration. We use Census data for the paper and oil industries to measure the share of each state in each firm's production during the 1967-1992 period. We use several measures of state environmental stringency and test for interactions between regulatory stringency and three factors: the firm's overall compliance rate, a Herfindahl index of industry concentration in the state, and the industry's share in the state economy. We find significant results for the paper industry: firms allocate smaller production shares to states with stricter regulations. This impact is concentrated among firms with low compliance rates, suggesting that low compliance rates are due to high compliance costs, not low compliance benefits. The interactions between stringency and industry characteristics are less often significant, but suggest that the paper industry is more affected by regulation where it is larger or more concentrated. Our results are weaker for the oil industry, reflecting either less opportunity to shift production across states or a greater impact of environmental regulation on paper mills.
Document Tags and Keywords
Keywords
Keywords are automatically generated using KeyBERT, a powerful and innovative
keyword extraction tool that utilizes BERT embeddings to ensure high-quality and contextually relevant
keywords.
By analyzing the content of working papers, KeyBERT identifies terms and phrases that capture the essence of the
text, highlighting the most significant topics and trends. This approach not only enhances searchability but
provides connections that go beyond potentially domain-specific author-defined keywords.
:
market,
econometric,
company,
state,
regulation,
regulatory,
regulation productivity,
emission,
pollution,
enforcement,
refinery,
environmental regulation,
epa,
environmental,
industry concentration,
polluting,
indicator,
policy
Tags
Tags are automatically generated using a pretrained language model from spaCy, which excels at
several tasks, including entity tagging.
The model is able to label words and phrases by part-of-speech,
including "organizations." By filtering for frequent words and phrases labeled as "organizations", papers are
identified to contain references to specific institutions, datasets, and other organizations.
:
Census of Manufactures,
Bureau of Labor Statistics,
Longitudinal Research Database,
Center for Economic Studies,
Energy Information Administration,
Census Bureau Longitudinal Business Database,
Environmental Protection Agency,
Pollution Abatement Costs and Expenditures
Similar Working Papers
Similarity between working papers are determined by an unsupervised neural
network model
know as Doc2Vec.
Doc2Vec is a model that represents entire documents as fixed-length vectors, allowing for the
capture of semantic meaning in a way that relates to the context of words within the document. The model learns to
associate a unique vector with each document while simultaneously learning word vectors, enabling tasks such as
document classification, clustering, and similarity detection by preserving the order and structure of words. The
document vectors are compared using cosine similarity/distance to determine the most similar working papers.
Papers identified with 🔥 are in the top 20% of similarity.
The 10 most similar working papers to the working paper 'When Do Firms Shift Production Across States to Avoid Environmental Regulation?' are listed below in order of similarity.
-
Working PaperPollution Abatement Costs, Regulation And Plant-Level Productivity🔥
December 1994
Working Paper Number:
CES-94-14
We analyze the connection between productivity, pollution abatement expenditures, and other measures of environmental regulation for plants in three industries (paper, oil, and steel). We examine data from 1979 to 1990, considering both total factor productivity levels and growth rates. Plants with higher abatement cost levels have significantly lower productivity levels. The magnitude of the impact is somewhat larger than expected: $1 greater abatement costs appears to be associated with the equivalent of $1.74 in lower productivity for paper mills, $1.35 for oil refineries, and $3.28 for steel mills. However, these results apply only to variation across plants in productivity levels. Estimates looking at productivity variation within plants over time, or estimates using productivity growth rates show a smaller (and insignificant) relationship between abatement costs and productivity. Other measures of environmental regulation faced by the plants (compliance status, enforcement activity, and emissions) are not significantly related to productivity.View Full Paper PDF
-
Working PaperManufacturing Plant Location: Does State Pollution Regulation Matter?🔥
July 1997
Working Paper Number:
CES-97-08
This paper tests whether differences across states in pollution regulation affect the location of manufacturing activity in the U.S. Plant-level data from the Census Bureau's Longitudinal Research Database is used to identify new plant births in each state over the 1963-1987 period. This is combined with several measures of state regulatory intensity, including business pollution abatement spending, regulatory enforcement activity, congressional pro-environment voting, and an index of state environmental laws. A significant connection is found: states with more stringent environmental regulation have fewer new manufacturing plants. These results persist across a variety of econometric specifications, and the strongest regulatory coefficients are similar in magnitude to thos4e on other factors expected to influence location, such as unionization rates. However, a subsample of high-pollution industries, which might have been expected to show much larger impacts, gets similar coefficients. This raises the possibility that differences between states other than environmental regulation might be influencing the results.View Full Paper PDF
-
Working PaperAssessing Multi-Dimensional Performance: Environmental and Economic Outcomes🔥
May 2005
Working Paper Number:
CES-05-03
This study examines the determinants of environmental and economic performance for plants in three traditional smoke-stack industries: pulp and paper, oil, and steel. We combine data from Census Bureau and EPA databases and Compustat on the economic performance, regulatory activity and environmental performance on air and water pollution emissions and toxic releases. We find that plants with higher labor productivity tend to have lower emissions. Regulatory enforcement actions (but not inspections) are associated with lower emissions, and state-level political support for environmental issues is associated with lower water pollution and toxic releases. There is little evidence that plants owned by larger firms perform better, nor do older plants perform worse.View Full Paper PDF
-
Working PaperEnvironmental Regulation And Manufacturing Productivity At The Plant Level🔥
March 1993
Working Paper Number:
CES-93-06
This paper presents results for an analysis of plant-level data from three manufacturing industries (paper, oil, and steel). We combine productivity data from the Longitudinal Research Database ( LRD ) with pollution abatement expenditures from the Census Bureau's Pollution Abatement Cost and Expenditures (PACE) survey, as well as regulatory measures taken from datasets maintained by the Environmental Protection Agency. We use data from 1979 to 1985, considering both labor and total factor productivity, both levels and growth rates, and both annual measures and averages over the period. We find a strong connection between regulation and productivity when regulation is measured by compliance costs. More regulated plants have significantly lower productivity levels and slower productivity growth rates than less regulated plants. The magnitude of the impacts are larger than expected: a $1 increase in compliance costs appears to reduce TFP by the equivalent of $3 to $4. Thus, commonly used methods of calculating the impact of regulation on productivity are substantially underestimated. These results are generally consistent across industries and for different estimation methods. Our other measures of regulation (compliance status, enforcement activity, and emissions) show much less consistent results. Higher enforcement, lower compliance, and higher emissions are generally associated with lower productivity levels and slower productivity growth, but the coefficients are rarely significant.View Full Paper PDF
-
Working PaperWhat Determines Environmental Performance at Paper Mills? The Roles of Abatement Spending, Regulation, and Efficiency🔥
April 2003
Working Paper Number:
CES-03-10
This paper examines the determinants of environmental performance at paper mills, measured by air pollution emissions per unit of output. We consider differences across plants in air pollution abatement expenditures, local regulatory stringency, and productive efficiency. Emissions are significantly lower in plants with a larger air pollution abatement capital stock: a 10 percent increase in abatement capital stock appears to reduce emissions by 6.9 percent. This translates into a sizable social return: one dollar of abatement capital stock is estimated to provide and annual return of about 75 cents in pollution reduction benefits. Local regulatory stringency and productive efficiency also matter: plants in non-attainment counties have 43 percent lower emissions and plants with 10 percent higher productivity have 2.5 percent lower emissions. For pollution abatement operating costs we find (puzzlingly) positive, but always insignificant, coefficients.View Full Paper PDF
-
Working PaperPlant Vintage, Technology, and Environmental Regulation🔥
September 2001
Working Paper Number:
CES-01-08
Does the impact of environmental regulation differ by plant vintage and technology? We answer this question using annual Census Bureau information on 116 pulp and paper mills' vintage, technology, productivity, and pollution abatement operating costs for 1979-1990. We find a significant negative relationship between pollution abatement costs and productivity levels. This is due almost entirely to integrated mills (those incorporating a pulping process), where a one standard deviation increase in abatement costs is predicted to reduce productivity by 5.4 percent. Older plants appear to have lower productivity but are less sensitive to abatement costs, perhaps due to 'grandfathering' of regulations. Mills which undergo renovations are also less sensitive to abatement costs, although these vintage and renovation results are not generally significant. We find similar results using a log-linear version of a three input Cobb-Douglas production function in which we include our technology, vintage, and renovation variables. Sample calculations of the impact of pollution abatement on productivity show the importance of allowing for differences based on plant technology. In a model incorporating technology interactions we estimate that total pollution abatement costs reduce productivity levels by an average of 4.7 percent across all the plants. The comparable estimate without technology interactions is 3.3 percent, approximately 30% lower.View Full Paper PDF
-
Working PaperPollution Abatement Expenditures and Plant-Level Productivity: A Production Function Approach🔥
August 2003
Working Paper Number:
CES-03-16
In this paper, we investigate the impact of environmental regulation on productivity using a Cobb-Douglas production function framework. Estimating the effects of regulation on productivity can be done with a top-down approach using data for broad sectors of the economy, or a more disaggregated bottom-up approach. Our study follows a bottom-up approach using data from the U.S. paper, steel, and oil industries. We measure environmental regulation using plant-level information on pollution abatement expenditures, which allows us to distinguish between productive and abatement expenditures on each input. We use annual Census Bureau information (1979-1990) on output, labor, capital, and material inputs, and pollution abatement operating costs and capital expenditures for 68 pulp and paper mills, 55 oil refineries, and 27 steel mills. We find that pollution abatement inputs generally contribute little or nothing to output, especially when compared to their '''productive''' equivalents. Adding an aggregate pollution abatement cost measure to a Cobb-Douglas production function, we find that a $1 increase in pollution abatement costs leads to an estimated productivity decline of $3.11, $1.80, and $5.98 in the paper, oil, and steel industries respectively. These findings imply substantial differences across industries in their sensitivity to pollution abatement costs, arguing for a bottom-up approach that can capture these differences. Further differentiating plants by their production technology, we find substantial differences in the impact of pollution abatement costs even within industries, with higher marginal costs at plants with more polluting technologies. Finally, in all three industries, plants concentrating on change-in-production-process abatement techniques have higher productivity than plants doing predominantly end-of-line abatement, but also seem to be more affected by pollution abatement operating costs. Overall, our results point to the importance using detailed, disaggregated analyses, even below the industry level, when trying to model the costs of forcing plants to reduce their emissions.View Full Paper PDF
-
Working PaperEnvironmental Regulation, Abatement, and Productivity: A Frontier Analysis
September 2013
Working Paper Number:
CES-13-51
This research studies the link between environmental regulation and plant level productivity in two U.S. manufacturing industries: pulp and paper mills and oil refineries using Data Envelopment Analysis (DEA) models. Data on abatement spending, emissions and abated emissions are used in different DEA models to study plant productivity outcomes when accounting for abatement spending or emissions regulations. Results indicate that pulp and paper mills and oil refineries in the U.S. suffered decreases in productivity due to pollution abatement activities from 1974 to 2000. These losses in productivity are substantial but have been slowly trending downwards even when the regulations have tended to become more stringent and emission of pollutants has declined suggesting that the best practice has shifted over time. Results also show that the reported abatement expenditures are not able to explain all the losses arising out of regulation suggesting that these abatement expenditures are consistently under-reported.View Full Paper PDF
-
Working PaperDo EPA Regulations Affect Labor Demand? Evidence From the Pulp and Paper Industry
August 2013
Working Paper Number:
CES-13-39
The popular belief is that environmental regulation must reduce employment, since suchregulations are expected to increase production costs, which would raise prices and thus reducedemand for output, at least in a competitive market. Although this effect might seem obvious, a careful microeconomic analysis shows that it is not guaranteed. Even if environmental regulation reduces output in the regulated industry, abating pollution could require additional labor (e.g. to monitor the abatement capital and meet EPA reporting requirements). It is also possible for pollution abatement technologies to be labor enhancing. In this paper we analyze how a particular EPA regulation, the so-called 'Cluster Rule' (CR) imposed on the pulp and paper industry in 2001, affected employment in that sector. Using establishment level data from the Census of Manufacturers and Annual Survey of Manufacturers at the U.S. Census Bureau from 1992-2007 we find evidence of small employment declines (on the order of 3%-7%), which are sometimes statistically significant, at a subset of the plants covered by the CR.View Full Paper PDF
-
Working PaperLocal Environmental Regulation and Plant-Level Productivity
September 2010
Working Paper Number:
CES-10-30R
This paper examines the impact of environmental regulation on the productivity of manufacturing plants in the United States. Establishment-level data from three Censuses of Manufactures are used to estimate 3-factor Cobb-Douglas production functions that include a measure of the stringency of environmental regulation faced by manufacturing plants. In contrast to previous studies, this paper examines effects on plants in all manufacturing industries, not just those in 'dirty' industries. Further, this paper employs spatial-temporal variation in environmental compliance costs to identify effects, using a time-varying county-level index that is based on multiple years of establishment-level data from the Pollution Abatement Costs and Expenditures survey and the Annual Survey of Manufactures. Results suggest that, for the average manufacturing plant, the effect on productivity of being in a county with higher environmental compliance costs is relatively small and often not statistically significant. For the average plant, the main effect of environmental regulation may not be in the spatial and temporal dimensions.View Full Paper PDF
