This paper examines how prices set by multinational firms vary across arm's-length and related party customers. Comparing prices within firms, products, destination countries, modes of transport and month, we find that the prices U.S. exporters set for their arm's-length customers are substantially larger than the prices recorded for related-parties. This price wedge is smaller for commodities than for differentiated goods, is increasing in firm size and firm export share, and is greater for goods sent to countries with lower corporate tax rates and higher tariffs. We also find that changes in exchange rates have differential effects on arm's-length and related-party prices; an appreciation of the dollar reduces the difference between the prices.
-
Firms' Exporting Behavior under Quality Constraints
May 2009
Working Paper Number:
CES-09-13
We develop a model of international trade with export quality requirements and two dimensions of firm heterogeneity. In addition to "productivity", firms are also heterogeneous in their "caliber" {the ability to produce quality using fewer fixed inputs. Compared to singleattribute models of firm heterogeneity emphasizing either productivity or the ability to produce quality, our model provides a more nuanced characterization of firms' exporting behavior. In particular, it explains the empirical fact that firm size is not monotonically related with export status: there are small firms that export and large firms that only operate in the domestic market. The model also delivers novel testable predictions. Conditional on size, exporters are predicted to sell products of higher quality and at higher prices, pay higher wages and use capital more intensively. These predictions, although apparently intuitive, cannot be derived from singleattribute models of firm heterogeneity as they imply no variation in export status after size is controlled for. We find strong support for the predictions of our model in manufacturing establishment datasets for India, the U.S., Chile, and Colombia.
View Full
Paper PDF
-
Global Sourcing and Multinational Activity: A Unified Approach
September 2022
Working Paper Number:
CES-22-36
Multinational firms (MNEs) accounted for 42 percent of US manufacturing employment, 87 percent of US imports, and 84 of US exports in 2007. Despite their disproportionate share of global trade, MNEs' input sourcing and final-good production decisions are often studied separately. Using newly merged data on firms' trade and FDI activity by country, we show that US MNEs are more likely to import not only from the countries in which they have affiliates, but also from other countries within their affiliates' region. We rationalize these patterns in a unified framework in which firms jointly determine the countries in which to produce final goods, and the countries from which to source inputs. The model generates a new source of scale economies that arises because a firm incurs a country specific fixed cost that allows all its assembly plants to source inputs from that country. This shared fixed cost across plants creates interdependencies between firms' assembly and sourcing locations, and leads to non-monotonic responses in third markets to bilateral trade cost changes.
View Full
Paper PDF
-
The Deaths of Manufacturing Plants
June 2002
Working Paper Number:
CES-02-15
This paper examines the causes of manufacturing plant deaths within and across industries in the U.S. from 1977-1997. The effects of international competition from low wage countries, exporting, ownership structure, product diversity, productivity, geography, and plant characteristics are considered. The probability of shutdowns is higher in industries that face increased competition from lowincome countries, especially for low-wage, labor-intensive plants within those industries. Conditional on industry and plant characteristics, closures occur more often at plants that are part of a multi-plant firm and at plants that have recently experienced a change in ownership. Plants owned by U.S. multinationals are more likely to close than similar plants at non-multinational firms. Exits occur less frequently at multi-product plants, at exporters, at plants that pay above average wages, and at large, older, more productive and more capital-intensive plants.
View Full
Paper PDF
-
Firm Structure, Multinationals, and Manufacturing Plant Deaths
October 2005
Working Paper Number:
CES-05-18
Plant shutdowns shape industry and aggregate productivity paths and play a major role in the dynamics of employment and industrial restructuring. Plant closures in the U.S. manufacturing sector account for more than half of gross job destruction. While multi-plant firms and multinationals dominate U.S. manufacturing, theoretical and empirical work has largely ignored the role of firms in the plant shutdown decision. This paper examines the effects of firm structure on manufacturing plant closures. Using U.S. data, we find that plants belonging to multi-plant firms are less likely to exit. Similarly, plants owned by U.S. multinationals are less likely to close. However, the superior survival chances are due to the characteristics of the plants themselves rather than the nature of the firms. Controlling for plant and industry attributes that reduce the probability of death, we find that plants owned by multi-unit firms and U.S. multinationals are much more likely to close. A recent change in ownership also increases the chances that a plant will be closed.
View Full
Paper PDF
-
Why Some Firms Export
June 2001
Working Paper Number:
CES-01-05
This paper presents a dynamic model of the export decision by a profit-maximizing firm. Using a panelofU.S.manufacturing plants, we test for the role of plant characteristics, spillovers from neighboring exporters, entry costs and government export promotion expenditures. Entry and exit in the export market by U.S. plants is substantial, past exporters are apt to reenter, and plants are likely to export in consecutive years. However, we find that entry costs are significant and spillovers from the export activity of other plants negligible. State export promotion expenditures have no significant effect on the probability of exporting. Plant characteristics, especially those indicative of past success, strongly increase the probability of exporting as do favorable exchange rate shocks.
View Full
Paper PDF
-
GLOBALIZATION AND TOP INCOME SHARES
February 2014
Working Paper Number:
CES-14-07
How does globalization affect the income gaps between the rich and the poor? This paper presents a new piece of empirical evidence showing that access to the global market, either through exporting or through multinational production, is associated with a higher executive-to-worker pay ratio within the firm. It then builds a model with heterogeneous firms, occupational choice, and executive compensation to model analytically and assess quantitatively the impact of globalization on the income gaps between the rich and the poor. The key mechanism is that the 'gains from trade' are not distributed evenly within the same firm. The compensation of an executive is positively linked to the size of the firm, while the wage paid to the workers is determined in a country- wide labor market. Any extra profit earned in the foreign markets benefits the executives more than the average worker. Counterfactual exercises suggest that this new channel is quantitatively important for the observed surge in top income shares in the data. Using the changes in the volume of trade and multinational firm sales, the model can explain around 33 percent of the surge in top income shares over the past two decades in the United States.
View Full
Paper PDF
-
An Alternative Theory of the Plant Size Distribution with an Application to Trade
May 2010
Working Paper Number:
CES-10-10
There is wide variation in the sizes of manufacturing plants, even within the most narrowly defined industry classifications used by statistical agencies. Standard theories attribute all such size differences to productivity differences. This paper develops an alternative theory in which industries are made up of large plants producing standardized goods and small plants making custom or specialty goods. It uses confidential Census data to estimate the parameters of the model, including estimates of plant counts in the standardized and specialty segments by industry. The estimated model fits the data relatively well compared with estimates based on standard approaches. In particular, the predictions of the model for the impacts of a surge in imports from China are consistent with what happened to U.S. manufacturing industries that experienced such a surge over the period 1997'2007. Large-scale standardized plants were decimated, while small-scale specialty plants were relatively less impacted.
View Full
Paper PDF
-
Supply Chain Adjustments to Tariff Shocks: Evidence from Firm Trade Linkages in the 2018-2019 U.S. Trade War
August 2024
Working Paper Number:
CES-24-43
We use the 2018-2019 U.S. trade war to examine how supply chains adjustments to a tariff cost shock affect imports and exports. Using confidential firm-trade linked data, we show that the decline in imports of tariffed goods was driven by discontinuations of U.S. buyer'foreign supplier relationships, reduced formation of new relationships, and exits by U.S. firms from import markets altogether. However, tariffed products where imports were concentrated in fewer suppliers had a smaller decline in import growth. We then construct measures of export exposure to import tariffs by linking tariffs paid by importing firms to their exported products. We find that the most exposed products had lower exports in 2018-2019, with most of the impact occurring in 2019.
View Full
Paper PDF
-
Are Customs Records Consistent Across Countries? Evidence from the U.S. and Colombia
March 2020
Working Paper Number:
CES-20-11
In many countries, official customs records include identifying information on the exporting and importing firms involved in each shipment. This information allows researchers to study international business networks, offshoring patterns, and the micro-foundations of aggregate trade flows. It also provides the government with a basis for tariff assessments at the border. However, there are no mechanisms in place to ensure that the shipment-level information recorded by the exporting country is consistent with the shipment-level information recorded by the importing country. And to the extent that there are discrepancies, it is not clear how prevalent they are or what form they take. In this paper we explore these issues, both to enhance our understanding of the limitations of customs records, and to inform future discussions of possible revisions in the way they are collected.
Specifically, we match U.S.-bound export shipments that appear in Colombian Customs records (DIAN) with their counterparts in the US Customs records (LFTTD): U.S. import shipments from Colombia. Several patterns emerge. First, differences in the coverage of the two countries customs records lead to significant discrepancies in the official bilateral trade flow statistics of these two countries: the DIAN database records 8 percent fewer transactions than the LFTTD database over the sample period, and the average export shipment size in the DIAN is roughly 4 percent smaller than the corresponding import shipment size in the LFTTD. These discrepancies are not due to difference in minimum shipment sizes and they are not particular to a few sectors, though they are more common among small shipments and they evolve over time.
Second, if we rely exclusively on firms' names and addresses, ignoring other shipment characteristics (value, product code, etc.), we are able to match 85 percent of the value of U.S. imports from Colombia in our LFTTD sample with particular Colombian suppliers in the DIAN. Further, fully 97 percent of the value of Colombian exports to the U.S. can be mapped onto particular importers in the U.S. LFTTD.
Third, however, match rates at the shipment level within buyer-seller pairs are low. That is, while buyers and sellers can be paired up fairly accurately, only 25-30 percent of the individual transactions in the customs records of the two countries can be matched using fuzzy algorithms at reasonable tolerance levels.
Fourth, the manufacturer ID (MANUF_ID) that appears in the LFTTD implies there are roughly twice as many Colombian exporters as actually appear in the DIAN. And similar comments apply to an analogous MANUF_ID variable constructed from importer name and address information in the DIAN. Hence studies that treat each MANUF_ID value as a distinct firm are almost surely overstating the number of foreign firms that engage in trade with the U.S. by a substantial amount.
Finally, we conclude that if countries were to require that exporters report standardized shipment identifiers'either invoice numbers or bill of lading/air waybill numbers'it would be far easier to track individual transactions and to identify international discrepancies in reporting.
View Full
Paper PDF
-
How Wide Is the Firm Border?
January 2017
Working Paper Number:
CES-17-35
We quantify the normally unobservable forces that determine the boundary of the firm; that is, which transactions are mediated by ownership control as opposed to contracts or markets. To do so, we examine the shipment decisions of tens of thousands of establishments that produce and distribute a variety of products throughout the goods-producing sector. We examine how a firm's willingness to ship over distance varies with whether the recipient is owned by the firm. Because shipping costs increase with distance for many reasons, a greater volume of internal transactions at any given distance reveals the size of the firm's perceived net cost advantage of internal transactions. We find that the firm boundary is notably wide. Having one more vertically integrated downstream establishment in a location has the same effect on transaction volumes to that location as does a 40 percent reduction in distance between sender and destination. We further characterize how this 'internal advantage' varies with observable attributes of the transaction or product being shipped. Finally, we conduct a calibration of a multi-sector general equilibrium trade model and find that costs associated with transacting across firm boundaries also have discernible economy-wide implications.
View Full
Paper PDF