-
Issues and Challenges in Measuring Environmental Expenditures by U.S. Manufacturing: The Redevelopment of the PACE Survey
July 2007
Working Paper Number:
CES-07-20
The Pollution Abatement Costs and Expenditures (PACE) survey is the most comprehensive source of information on U.S. manufacturing's capital expenditures and operating costs associated with pollution abatement. In 2003, the U.S. Environmental Protection Agency began a significant initiative to redevelop the survey, guided by the advice of a multi-disciplinary workgroup consisting of economists, engineers, survey design experts, and experienced data users, in addition to incorporating feedback from key manufacturing industries. This paper describes some of these redevelopment efforts. Issues discussed include the approach to developing the new survey instrument, methods used to evaluate (and improve) its performance, innovations in sampling, and the special development and role of outside expertise. The completely redesigned PACE survey was first administered in early 2006.
View Full
Paper PDF
-
Assessing Multi-Dimensional Performance: Environmental and Economic Outcomes
May 2005
Working Paper Number:
CES-05-03
This study examines the determinants of environmental and economic performance for plants in three traditional smoke-stack industries: pulp and paper, oil, and steel. We combine data from Census Bureau and EPA databases and Compustat on the economic performance, regulatory activity and environmental performance on air and water pollution emissions and toxic releases. We find that plants with higher labor productivity tend to have lower emissions. Regulatory enforcement actions (but not inspections) are associated with lower emissions, and state-level political support for environmental issues is associated with lower water pollution and toxic releases. There is little evidence that plants owned by larger firms perform better, nor do older plants perform worse.
View Full
Paper PDF
-
A Change of PACE: Comparing the 1994 and 1999 Pollution Abatement Costs and Expenditures Surveys
July 2004
Working Paper Number:
CES-04-09
Since 1973, the Pollution Abatement Costs and Expenditures (PACE) survey has been the principle source of information on U.S. industries' capital expenditure and operating costs associated with pollution abatement efforts. The PACE survey was discontinued after 1994 and then revived in 1999 for one year ' in a substantially different form than the preceding surveys however, making longitudinal analysis quite difficult. Conceptual differences include matters as fundamental as the scope and meaning of pollution abatement as well as the definition of operating costs. A number of other critical changes also exist, including ones of industrial coverage and sample selection. This paper is the first comprehensive effort to document the many changes in the PACE survey across these years and to provide a detailed guide for researchers and policymakers who wish to compare the 1994 and 1999 data. Overall, we find a 27% decline in environmental spending by the manufacturing sector between these two years, though there appears to be significant heterogeneity across industries. We discuss potential reasons for this dramatic decline, focusing mainly on issues of survey methodology and design. This paper should help inform current efforts to redevelop the PACE survey and re-establish it as a regular, annual survey.
View Full
Paper PDF
-
Pollution Abatement Expenditure by U.S. Manufacturing Plants: Do Community Characteristics Matter?
November 2003
Working Paper Number:
CES-03-18
A number of previous studies have demonstrated the impact of community characteristics on environmental outcomes such as local pollution levels and the siting of noxious facilities. If certain groups are indeed exposed to higher levels of air pollution, it may be due to a greater concentration of air polluters in those communities and/or facilities in those areas investing less in air pollution abatement. This paper examines the latter, using establishment-level data on manufacturing plants from the U.S. Census Bureau'''s Pollution Abatement Costs and Expenditures (PACE) survey. The empirical formulation herein allows plant-level air pollution abatement operating costs to depend on an array of community characteristics common to this literature. After controlling for establishment characteristics and federal, state, and local regulation, some of these local factors are found to have had an additional effect on air pollution abatement expenditures. In particular, populations with higher homeownership rates and higher per capita income enjoyed greater pollution abatement activity from their nearby plants. Meanwhile, establishments in communities where manufacturing accounted for a greater share of local employment had less pollution abatement spending, suggesting a local constituency that is more resistant to additional regulation. Political ideology is also found to play a role, with plants in areas with larger concentrations of Democrats having more expenditure on air pollution abatement, all else being equal. There is little evidence that race and ethnicity matter when it comes to the pollution abatement behavior of the most pollution-intensive facilities. The findings of this paper support those of a number of recent studies.
View Full
Paper PDF
-
Pollution Abatement Expenditures and Plant-Level Productivity: A Production Function Approach
August 2003
Working Paper Number:
CES-03-16
In this paper, we investigate the impact of environmental regulation on productivity using a Cobb-Douglas production function framework. Estimating the effects of regulation on productivity can be done with a top-down approach using data for broad sectors of the economy, or a more disaggregated bottom-up approach. Our study follows a bottom-up approach using data from the U.S. paper, steel, and oil industries. We measure environmental regulation using plant-level information on pollution abatement expenditures, which allows us to distinguish between productive and abatement expenditures on each input. We use annual Census Bureau information (1979-1990) on output, labor, capital, and material inputs, and pollution abatement operating costs and capital expenditures for 68 pulp and paper mills, 55 oil refineries, and 27 steel mills. We find that pollution abatement inputs generally contribute little or nothing to output, especially when compared to their '''productive''' equivalents. Adding an aggregate pollution abatement cost measure to a Cobb-Douglas production function, we find that a $1 increase in pollution abatement costs leads to an estimated productivity decline of $3.11, $1.80, and $5.98 in the paper, oil, and steel industries respectively. These findings imply substantial differences across industries in their sensitivity to pollution abatement costs, arguing for a bottom-up approach that can capture these differences. Further differentiating plants by their production technology, we find substantial differences in the impact of pollution abatement costs even within industries, with higher marginal costs at plants with more polluting technologies. Finally, in all three industries, plants concentrating on change-in-production-process abatement techniques have higher productivity than plants doing predominantly end-of-line abatement, but also seem to be more affected by pollution abatement operating costs. Overall, our results point to the importance using detailed, disaggregated analyses, even below the industry level, when trying to model the costs of forcing plants to reduce their emissions.
View Full
Paper PDF
-
What Determines Environmental Performance at Paper Mills? The Roles of Abatement Spending, Regulation, and Efficiency
April 2003
Working Paper Number:
CES-03-10
This paper examines the determinants of environmental performance at paper mills, measured by air pollution emissions per unit of output. We consider differences across plants in air pollution abatement expenditures, local regulatory stringency, and productive efficiency. Emissions are significantly lower in plants with a larger air pollution abatement capital stock: a 10 percent increase in abatement capital stock appears to reduce emissions by 6.9 percent. This translates into a sizable social return: one dollar of abatement capital stock is estimated to provide and annual return of about 75 cents in pollution reduction benefits. Local regulatory stringency and productive efficiency also matter: plants in non-attainment counties have 43 percent lower emissions and plants with 10 percent higher productivity have 2.5 percent lower emissions. For pollution abatement operating costs we find (puzzlingly) positive, but always insignificant, coefficients.
View Full
Paper PDF
-
Estimating the Hidden Costs of Environmental Regulation
May 2002
Working Paper Number:
CES-02-10
This paper examines whether accounting systems identify all the costs of environmental regulation. We estimate the relation between the 'visible' cost of regulatory compliance, i.e., costs that are correctly classified in firms' accounting systems, and 'hidden' costs i.e., costs that are embedded in other accounts. We use plant-level data from 55 steel mills to estimate hidden costs, and we follow up with structured interviews of corporate-level managers and plant-level accountants. Empirical results show that a $1 increase in the visible cost of environmental regulation is associated with an increase in total cost (at the margin) of $10-11, of which $9-10 are hidden in other accounts. The findings suggest that inappropriate identification and accumulation of the costs of environmental compliance are likely to lead to distorted costs in firms subject to environmental regulation.
View Full
Paper PDF
-
When Do Firms Shift Production Across States to Avoid Environmental Regulation?
December 2001
Working Paper Number:
CES-01-18
This paper examines whether a firm's allocation of production across its plants responds to the environmental regulation faced by those plants, as measured by differences in stringency across states. We also test whether sensitivity to regulation differs based on differences across firms in compliance behavior and/or differences across states in industry importance and concentration. We use Census data for the paper and oil industries to measure the share of each state in each firm's production during the 1967-1992 period. We use several measures of state environmental stringency and test for interactions between regulatory stringency and three factors: the firm's overall compliance rate, a Herfindahl index of industry concentration in the state, and the industry's share in the state economy. We find significant results for the paper industry: firms allocate smaller production shares to states with stricter regulations. This impact is concentrated among firms with low compliance rates, suggesting that low compliance rates are due to high compliance costs, not low compliance benefits. The interactions between stringency and industry characteristics are less often significant, but suggest that the paper industry is more affected by regulation where it is larger or more concentrated. Our results are weaker for the oil industry, reflecting either less opportunity to shift production across states or a greater impact of environmental regulation on paper mills.
View Full
Paper PDF
-
Air Pollution Abatement Costs Under the Clean Air Act: Evidence from the PACE Survey
December 2001
Working Paper Number:
CES-01-12
This paper uses establishment-level data from the U.S. Census Bureau's Pollution Abatement Costs and Expenditures (PACE) survey to investigate the effects of air quality regulation on the air pollution abatement capital expenditures and operating costs of manufacturing plants from 1979-1988. Results, based on some 90,000 observations, show that heavy emitters of the 'criteria' air pollutants (covered under the Clean Air Act) had significantly larger APA costs, and those subject to greater 'local' regulation (due to county NAAQS non-attainment) had expenditures that were greater still. The local regulation of a particular air pollutant generally resulted in hundreds of thousands of dollars (or more) of additional costs, with larger establishments and capital expenditures disproportionately affected. Federal and state environmental standards appear to have played a notable role, particularly in industries producing chemicals, petroleum, primary metals, and nonmetallic minerals. The findings of this paper support those of several recent studies.
View Full
Paper PDF
-
Plant Vintage, Technology, and Environmental Regulation
September 2001
Working Paper Number:
CES-01-08
Does the impact of environmental regulation differ by plant vintage and technology? We answer this question using annual Census Bureau information on 116 pulp and paper mills' vintage, technology, productivity, and pollution abatement operating costs for 1979-1990. We find a significant negative relationship between pollution abatement costs and productivity levels. This is due almost entirely to integrated mills (those incorporating a pulping process), where a one standard deviation increase in abatement costs is predicted to reduce productivity by 5.4 percent. Older plants appear to have lower productivity but are less sensitive to abatement costs, perhaps due to 'grandfathering' of regulations. Mills which undergo renovations are also less sensitive to abatement costs, although these vintage and renovation results are not generally significant. We find similar results using a log-linear version of a three input Cobb-Douglas production function in which we include our technology, vintage, and renovation variables. Sample calculations of the impact of pollution abatement on productivity show the importance of allowing for differences based on plant technology. In a model incorporating technology interactions we estimate that total pollution abatement costs reduce productivity levels by an average of 4.7 percent across all the plants. The comparable estimate without technology interactions is 3.3 percent, approximately 30% lower.
View Full
Paper PDF
