-
International Trade, Employment, and Earnings: Evidence from U.S. Rural Counties
May 2003
Working Paper Number:
CES-03-12
Rural manufacturers in the United States are considered highly vulnerable to competition from international imports. Yet only limited empirical attention has been paid to the effects of trade on U.S. rural economies. This paper investigates the effects of international trade on U.S. rural manufacturing economies and compares the effects of trade pressures in rural versus urban areas. Our results indicate that lower export prices are associated with increased manufacturing employment and earnings in both rural and urban counties, while lower import prices are associated with reduced rural employment but increased urban employment. Greater export orientation is associated with lower employment and earnings in both rural and urban counties, while import orientation has mixed effects.
View Full
Paper PDF
-
Survival of the Best Fit: Competition from Low Wage Countries and the (Uneven) Growth of U.S. Manufacturing Plants
October 2002
Working Paper Number:
CES-02-22
We examine the relationship between import competition from low wage countries and the reallocation of US manufacturing from 1977 to 1997. Both employment and output growth are slower for plants that face higher levels of low wage import competition in their industry. As a result, US manufacturing is reallocated over time towards industries that are more capital and skill intensive. Differential growth is driven by a combination of increased plant failure rates and slower growth of surviving plants. Within industries, low wage import competition has the strongest effects on the least capital and skill intensive plants. Surviving plants that switch industries move into more capital and skill intensive sectors when they face low wage competition.
View Full
Paper PDF
-
Exporting and Productivity: The Importance of Reallocation
June 2001
Working Paper Number:
CES-01-02
Exporting is often touted as a way to increase economic growth. This paper examines whether exporting has played any role in increasing productivity growth in U.S. manufacturing. While exporting plants have substantially higher productivity levels, there is no evidence that exporting increases plant productivity growth rates. However, within the same industry, exporters do grow faster than non-exporters in terms of both shipments and employment. Exporting is associated with the reallocation of resources from less ecient to more ecient plants. In the aggregate, these reallocation eects are quite large, making up over 40% of total factor productivity growth in the manufacturing sector. Half of this reallocation to more productive plants occurs within industries and the direction of the reallocation is towards exporting plants. The positive contribution of exporters also shows up in import-competing industries and non-tradable sectors.
View Full
Paper PDF
-
Exporting and Productivity
May 2000
Working Paper Number:
CES-00-07
Exporting is often touted as a way to increase economic growth. This paper examines whether exporting has played any role in increasing productivity growth in U.S. manufacturing. Contemporaneous levels of exports and productivity are indeed positively correlated across manufacturing industries. However, tests on industry data show causality from productivity to exporting but not the reverse. While exporting plants have substantially higher productivity levels, we find no evidence that exporting increases plant productivity growth rates. However, within the same industry, exporters do grow faster than non-exporters in terms of both shipments and employment. We show that exporting is associated with the reallocation of resources from less efficient to more efficient plants. In the aggregate, these reallocation effects are quite large, making up over 40 percent of total factor productivity growth in the manufacturing sector. Half of this reallocation to more productive plants occurs within industries and the direction of the reallocation is towards exporting plants. The positive contribution of exporters even shows up in import-competing industries and non-tradable sectors. The overall contribution of exporters to manufacturing productivity growth far exceeds their shares of employment and output.
View Full
Paper PDF
-
An Applied General Equilibrium Model Of Moroccan Trade Liberalization Featuring External Economies
November 1997
Working Paper Number:
CES-97-16
Since the 1920's economists have wrestled with the effects of external economies on trade liberalization. In this paper I show that under extreme conditions, externalities can reverse the gains from trade found in perfectly competitive trade models. However, the externalities needed to generate this result, even under the worst possible conditions (all expanding industries are subject to negative externalities, all contracting industries have positive externalities) are orders of magnitude larger than those estimated in Krizan (1997). This suggests that the presence of external economies of scale does not provide a credible argument for protectionism. On the other hand, the CGE model showed that external effects can increase the welfare gains from trade liberalization, but the combined effect is still small compared to other policy options. This finding contrasts sharply with many models featuring internal returns to scale that are able to generate large welfare benefits from trade liberalization.
View Full
Paper PDF
-
Recent Twists of the Wage Structure and Technology Diffusion
March 1994
Working Paper Number:
CES-94-05
This paper is an empirical study of the impact on U.S. wage structure of domestic technology, foreign technology, and import penetration. A model is presented which combines factor proportions theory with a version of growth theory. The model, which assumes two levels of skill, suggests that domestic technology raises both wages, while foreign technology, on a simple interpretation, lowers both. Trade at a constant technology, as usual, lowers the wage of that class of labor used intensively by the affected industry, and raises the other wage. The findings support the predictions of the model for domestic technology. On the other hand, they suggest that technological change, and perhaps other factors, have obscured the role of factor proportions in the data. Indeed, foreign technology and trade have the same effect on wages at different skill levels, not the opposite effects suggested by factor proportions. Finally, a simple diffusion story, in which foreign technology lowers all U.S. wages, is also rejected. Instead, uniformly higher U.S. wages, not lower, appear to be associated with the technology and trade of the oldest trading partners of the U.S., the economies of the West. Not so for Asia, especially the smaller countries which have recently accelerated their trade with the U.S. Their effects are uniformly negative on wages, suggesting a distinction between shock and long run effects of foreign technology and trade.
View Full
Paper PDF
-
R&D Reactions To High-Technology Import Competition
March 1991
Working Paper Number:
CES-91-02
For a seventeen-year panel covering 308 U.S. manufacturing corporations, we analyze firms' R&D spending reactions to changes in high-technology imports. On average, companies reduced their R&D/sales ratios in the short run as imports rose. Individual company reactions were heterogeneous, especially for multinational firms. Short-run reactions were more aggressive (i.e., tending toward R&D/sales ratio increases), the more concentrated the markets were in which the companies operated, the larger the company was, and the more diversified the firm's sales mix was. Reactions were less aggressive when special trade barriers had been erected or patent protection was strong in the impacted industries. Companies with a top executive officer educated in science or engineering were more likely to increase R&D/sales ratios in response to an import shock, all else equal. Over the full 17-year sample period, reactions may have shifted toward greater average aggressiveness.
View Full
Paper PDF
-
The Determinants of U.S. Intra-Industry Trade
December 1990
Working Paper Number:
CES-90-13
Responses from the Yale University survey of 650 research and development executives were linked to U.S. trade statistics at the four-digit SIC level for the years 1965-85 to test several hypotheses concerning intra-industry trade. A new index of intra-industry trade was developed to capture both the level and balance dimensions of import and export flows. Intra-industry trade is found to be more extensive, the higher industry R&D/sales ratios were, the more important economies of learning-by-doing were, and greater the relevance of academic engineering research was, and the more niche-filling strategies were emphasized in new product development. When firms oriented their R&D efforts toward meeting the specialized demands of individual customers, intra-industry trade was lower. The highest levels of intra-industry trade were found in loosely oligopolistic industries.
View Full
Paper PDF
-
Measuring The Trade Balance In Advanced Technology Products
January 1989
Working Paper Number:
CES-89-01
Because of the dramatic decline in the United States Trade Balance since the early 1970's, many economists and policy makers have become increasingly concerned about the ability of U.S. manufacturers to compete with foreign producers. Initially concern was limited to a few basic industries such as shoes, clothing, and steel; but more recently foreign producers have been effectively competing with U.S. manufacturers in automobiles, electronics, and other consumer products. It now seems that foreign producers are even challenging the dominance of America in high technology industries. The most recent publication from the International Trade Administration shows that the U.S. Trade Balance in high technology industries fell from a $24 billion surplus in 1982, to a $2.6 billion deficit in 1986, before rebounding to a $591 million surplus in 1987. As part of the efforts of the U.S. Census Bureau to provide policy makers and other interested parties with the most complete and accurate information possible, we recently completed a review of the methodology and data used to construct trade statistics in the area of high technology trade. Our findings suggest that the statistics presented by the International Trade Administration, although technically correct, do not provide an accurate picture of international trade in high or advanced technology products because of the level of aggregation used in their construction. The ITA statistics are based on the Department of Commerce's DOC3 definition of high technology industries. The DOC3 definition requires that each product classified in a high tech industry be designated high tech. As a result, many products which would not individually be considered high tech are included in the statistics. After developing a disaggregate, product- based measure of international trade in Advanced Technology Products (ATP), we find that although the trade balance in these products did decline over the 1982-1987 period, the decline is much smaller (about $5 billion) than reported by ITA (approximately $24 billion). This paper discusses the methodology used to define the ATP measure, contrasts it to the DOC3 measure, and provides a comparison of the resulting statistics. After discussing alternative approaches to identifying advanced technology products, Section 2 describes the advanced technologies in the classification. (Appendix A, provides definitions and examples of the products which embody these technologies. In addition, Appendix B, available on request, provides a comprehensive list of Advanced Technology Products by technology grouping.) Having described the ATPs, Section 3 examines annual trade statistics for ATP products, in 1982, 1986, and 1987, and compares these statistics with equivalent ones based on the DOC3 measure. The differences between the two measures over the 1982- 87 period stem from changes in the balance of trade of items included in the DOC3 measure but excluded by the Census ATP measure; i.e. the differences are due to changes in the trade balance of "low tech" products which are produced in "high tech" industries. This finding corroborates a principal argument for construction of the ATP measure, that the weakness of the DOC3 measure of high technology trade is the level of aggregation used in its construction. It also suggests that at the level of individual products the high technology sectors of the economy continue to enjoy a strong comparative advantage and are surprisingly healthy. Nonetheless, some areas of weakness are identified, such as low tech products in high tech industries. (Appendix C, supplements this material by providing a detailed listing of traded products included and excluded from the Advanced Technology definition for each DOC3 high tech commodity grouping. These Tables enable the reader to directly assess the Census classification.)
View Full
Paper PDF
