-
Wage Dispersion, Compensation Policy and the Role of Firms
November 2005
Working Paper Number:
tp-2005-04
Empirical work in economics stresses the importance of unobserved firm- and person-level characteristics
in the determination of wages, finding that these unobserved components account for the overwhelming
majority of variation in wages. However, little is known about the mechanisms sustaining these wage di'er-
entials. This paper attempts to demystify the firm-side of the puzzle by developing a statistical model that
enriches the role that firms play in wage determination, allowing firms to influence both average wages as
well as the returns to observable worker characteristics.
I exploit the hierarchical nature of a unique employer-employee linked dataset for the United States,
estimating a multilevel statistical model of earnings that accounts for firm-specific deviations in average
wages as well as the returns to components of human capital - race, gender, education, and experience -
while also controlling for person-level heterogeneity in earnings. These idiosyncratic prices reflect one aspect
of firm compensation policy; another, and more novel aspect, is the unstructured characterization of the
covariance of these prices across firms.
I estimate the model's variance parameters using Restricted (or Residual) Maximum Likelihood tech-
niques. Results suggest that there is significant variation in the returns to worker characteristics across
firms. First, estimates of the parameters of the covariance matrix of firm-specific returns are statistically
significant. Firms that tend to pay higher average wages also tend to pay higher than average returns to
worker characteristics; firms that tend to reward highly the human capital of men also highly reward the
human capital of women. For instance, the correlation between the firm-specific returns to education for
men and women is 0.57. Second, the firm-specific returns account for roughly 9% of the variation in wages
- approximately 50% of the variation in wages explained by firm-specific intercepts alone. The inclusion of
firm-specific returns ties variation in wages, otherwise attributable to firm-specific intercepts, to observable
components of human capital.
View Full
Paper PDF
-
Networking Off Madison Avenue
October 2005
Working Paper Number:
CES-05-15
This paper examines the effect on productivity of having more near advertising agency neighbors and hence better opportunities for meetings and exchange within Manhattan. We will show that there is extremely rapid spatial decay in the benefits of having more near neighbors even in the close quarters of southern Manhattan, a finding that is new to the empirical literature and indicates our understanding of scale externalities is still very limited. The finding indicates that having a high density of commercial establishments is important in enhancing local productivity, an issue in Lucas and Rossi-Hansberg (2002), where within business district spatial decay of spillovers plays a key role. We will argue also that in Manhattan advertising agencies trade-off the higher rent costs of being in bigger clusters nearer 'centers of action', against the lower rent costs of operating on the 'fringes' away from high concentrations of other agencies. Introducing the idea of trade-offs immediately suggests heterogeneity is involved. We will show that higher quality agencies are the ones willing to pay more rent to locate in greater size clusters, specifically because they benefit more from networking. While all this is an exploration of neighborhood and networking externalities, the findings relate to the economic anatomy of large metro areas like New Yorkthe nature of their buzz.
View Full
Paper PDF
-
Micro and Macro Data Integration: The Case of Capital
May 2005
Working Paper Number:
CES-05-02
Micro and macro data integration should be an objective of economic measurement as it is clearly advantageous to have internally consistent measurement at all levels of aggregation ' firm, industry and aggregate. In spite of the apparently compelling arguments, there are few measures of business activity that achieve anything close to micro/macro data internal consistency. The measures of business activity that are arguably the worst on this dimension are capital stocks and flows. In this paper, we document, quantify and analyze the widely different approaches to the measurement of capital from the aggregate (top down) and micro (bottom up) perspectives. We find that recent developments in data collection permit improved integration of the top down and bottom up approaches. We develop a prototype hybrid method that exploits these data to improve micro/macro data internal consistency in a manner that could potentially lead to substantially improved measures of capital stocks and flows at the industry level. We also explore the properties of the micro distribution of investment. In spite of substantial data and associated measurement limitations, we show that the micro distributions of investment exhibit properties that are of interest to both micro and macro analysts of investment behavior. These findings help highlight some of the potential benefits of micro/macro data integration.
View Full
Paper PDF
-
Computer Investment, Computer Networks and Productivity
January 2005
Working Paper Number:
CES-05-01
Researchers in a large empirical literature find significant relationships between computers and labor productivity, but the estimated size of that relationship varies considerably. In this paper, we estimate the relationships among computers, computer networks, and plant-level productivity in U.S. manufacturing. Using new data on computer investment, we develop a sample with the best proxies for computer and total capital that the data allow us to construct. We find that computer networks and computer inputs have separate, positive, and significant relationships with U.S. manufacturing plant-level productivity. Keywords: computer input; information technology; labor productivity
View Full
Paper PDF
-
A Flexible Test for Agglomeration Economies in Two U.S. Manufacturing Industries
August 2004
Working Paper Number:
CES-04-14
This paper uses the inverse input demand function framework of Kim (1992) to test for economies of industry and urban size in two U.S. manufacturing sectors of differing technology intensity: farm and garden machinery (SIC 352) and measuring and controlling devices (SIC 382). The inverse input demand framework permits the estimation of the production function jointly with a set of cost shares without the imposition of prior economic restrictions. Tests using plant-level data suggest the presence of population scale (urbanization) economies in the moderate- to low-technology farm and garden machinery sector and industry scale (localization) economies in the higher technology measuring and controlling devices sector. The efficiency and generality of the inverse input demand approach are particularly appropriate for micro-level studies of agglomeration economies where prior assumptions regarding homogeneity and homotheticity are less appropriate.
View Full
Paper PDF
-
Productivity Growth Patterns in U.S. Food Manufacturing: Case of Dairy Products Industry
May 2004
Working Paper Number:
CES-04-08
A panel constructed from the Census Bureau's Longitudinal Research Database is used to measure total factor productivity growth at the plant-level and analyzes the multifactor bias of technical change at three-digit product group level containing five different four-digit sub-group categories for the U.S. dairy products industry from 1972 through 1995. In the TFP growth decomposition, analyzing the growth and its components according to the quartile ranks show that scale effect is the most significant element of TFP growth except the plants in the third quartile rank where technical change dominates throughout the time periods. The exogenous input bias results show that throughout the time periods, technical change is 1) capital-using; 2) labor-using after 1980; 3) material-saving except 1981-1985 period; and, 4) energy-using except 1981-1985 and 1991-1995 periods. Plant productivity analysis indicate that less than 50% of the plants in the dairy products industry stay in the same category, indicating considerable movement between productivity rank categories. Investment analysis results indicate that plant-level investments are quite lumpy since a relatively small percent of observations account for a disproportionate share of overall investment. Productivity growth is found to be positively correlated with recent investment spikes for plants with TFP ranking in the middle two quartiles and uncorrelated with plants in the smallest and largest quartiles. Similarly, past TFP growth rates present no significant correlation with future investment spikes for plants in any quartile.
View Full
Paper PDF
-
Location, Location, Location: The 3L Approach to House Price Determination
May 2004
Working Paper Number:
CES-04-06
The immobility of houses means that their location affects their values. This explains the common belief that three things determine the price of a house: location, location, and location. We use this notion to develop the 3L Approach to house price determination. That is, prices are determined by the Metropolitan Statistical Area (MSA), town, and street where the house is located. This study creates a unique data set based on data from the American Housing Survey (AHS) consisting of small 'clusters' of housing units with information on their housing characteristics and resident characteristics that is merged with census tract-level attributes. We use this data to verify the 3L Approach: we find that all three levels of location are significant when estimating the house price hedonic equation. This indicates that individuals care about their local neighborhood, i.e. the general upkeep of their street and possibly their neighbors' characteristics (cluster variables), a broader area such as the school district and/or the town (tract variables) that account for school quality and crime rates, and the particular amenities found in their MSA.
View Full
Paper PDF
-
Do Tax Incentives Affect Local Economic Growth? What Mean Impacts Miss in the Analysis of Enterprise Zone Policies
September 2003
Working Paper Number:
CES-03-17
Geographically-targeted tax incentives remain popular initiatives in response to deteriorating economic conditions of urban and industrial areas. This paper exploits the exogenous variations of the U.S. state Enterprise Zone programs to estimate the impact of various incentive features on a number of dimensions of local economic growth. The econometric analysis uses plant level data to sort out growth outcomes into gross flows separately accounted for by new, existing, and vanishing businesses in the target areas. Results offer empirical evidence to support a number of specific policy recommendations and show that the impact of the incentives has more complex dynamics than those revealed by the null mean impact estimates obtained from analyzing net growth outcomes.
View Full
Paper PDF
-
Pollution Abatement Expenditures and Plant-Level Productivity: A Production Function Approach
August 2003
Working Paper Number:
CES-03-16
In this paper, we investigate the impact of environmental regulation on productivity using a Cobb-Douglas production function framework. Estimating the effects of regulation on productivity can be done with a top-down approach using data for broad sectors of the economy, or a more disaggregated bottom-up approach. Our study follows a bottom-up approach using data from the U.S. paper, steel, and oil industries. We measure environmental regulation using plant-level information on pollution abatement expenditures, which allows us to distinguish between productive and abatement expenditures on each input. We use annual Census Bureau information (1979-1990) on output, labor, capital, and material inputs, and pollution abatement operating costs and capital expenditures for 68 pulp and paper mills, 55 oil refineries, and 27 steel mills. We find that pollution abatement inputs generally contribute little or nothing to output, especially when compared to their '''productive''' equivalents. Adding an aggregate pollution abatement cost measure to a Cobb-Douglas production function, we find that a $1 increase in pollution abatement costs leads to an estimated productivity decline of $3.11, $1.80, and $5.98 in the paper, oil, and steel industries respectively. These findings imply substantial differences across industries in their sensitivity to pollution abatement costs, arguing for a bottom-up approach that can capture these differences. Further differentiating plants by their production technology, we find substantial differences in the impact of pollution abatement costs even within industries, with higher marginal costs at plants with more polluting technologies. Finally, in all three industries, plants concentrating on change-in-production-process abatement techniques have higher productivity than plants doing predominantly end-of-line abatement, but also seem to be more affected by pollution abatement operating costs. Overall, our results point to the importance using detailed, disaggregated analyses, even below the industry level, when trying to model the costs of forcing plants to reduce their emissions.
View Full
Paper PDF
-
The Role of Technological and Industrial Heterogeneity In Technology Diffusion: a Markovian Approach
February 2003
Working Paper Number:
CES-03-07
Recent empirical studies have established the importance of intra and inter-industry heterogeneity in investment in innovation and other outcomes. This paper examines the role of industry and technology heterogeneity in the diffusion of advanced manufacturing technologies from a simple Markovian approach. Using the Maximum Entropy estimator, I estimate transition probabilities and corresponding half-lives, look for outliers in technology and industry diffusion patterns, and try to find explanations of their unusual behavior in idiosyncratic technology and industry characteristics. A consistent industry-level pattern that emerged is one that relates consumer demand and production processes. It seems that in industries where hand-made products are a sign of quality to the customer, technology spreads very slowly. On the other hand, in industries where demand for sophisticated, high-precision goods is high or in industries where demand-driven product specifications vary quite rapidly over relatively short periods of time, advanced technologies diffuse much more rapidly.
View Full
Paper PDF
