-
Productivity Growth Patterns in U.S. Food Manufacturing: Case of Dairy Products Industry
May 2004
Working Paper Number:
CES-04-08
A panel constructed from the Census Bureau's Longitudinal Research Database is used to measure total factor productivity growth at the plant-level and analyzes the multifactor bias of technical change at three-digit product group level containing five different four-digit sub-group categories for the U.S. dairy products industry from 1972 through 1995. In the TFP growth decomposition, analyzing the growth and its components according to the quartile ranks show that scale effect is the most significant element of TFP growth except the plants in the third quartile rank where technical change dominates throughout the time periods. The exogenous input bias results show that throughout the time periods, technical change is 1) capital-using; 2) labor-using after 1980; 3) material-saving except 1981-1985 period; and, 4) energy-using except 1981-1985 and 1991-1995 periods. Plant productivity analysis indicate that less than 50% of the plants in the dairy products industry stay in the same category, indicating considerable movement between productivity rank categories. Investment analysis results indicate that plant-level investments are quite lumpy since a relatively small percent of observations account for a disproportionate share of overall investment. Productivity growth is found to be positively correlated with recent investment spikes for plants with TFP ranking in the middle two quartiles and uncorrelated with plants in the smallest and largest quartiles. Similarly, past TFP growth rates present no significant correlation with future investment spikes for plants in any quartile.
View Full
Paper PDF
-
Productivity Growth Patterns in U.S. Food Manufacturing: Case of Meat Products Industry
March 2004
Working Paper Number:
CES-04-04
A panel constructed from the Census Bureau's Longitudinal Research Database is used to measure total factor productivity growth at the plant-level and analyzes the multifactor bias of technical change for the U.S. meat products industry from 1972 through 1995. For example, addressing TFP growth decomposition for the meat products sub-sector by quartile ranks shows that the technical change effect is the dominant element of TFP growth for the first two quartiles, while the scale effect dominates TFP growth for the higher two quartiles. Throughout the time period, technical change is 1) capital-using; 2) material-saving; 3) labor-using; and, 4) energy-saving and becoming energy-using after 1980. The smaller sized plants are more likely to fluctuate in their productivity rankings; in contrast, large plants are more stable in their productivity rankings. Plant productivity analysis indicate that less than 50% of the plants in the meat industry stay in the same category, indicating considerable movement between productivity rank categories. Investment analysis results strongly indicate that plant-level investments are quite lumpy since a relatively small percent of observations account for a disproportionate share of overall investment. Productivity growth is found to be positively correlated with recent investment spikes for plants with TFP ranking in the middle two quartiles and uncorrelated with firms in the smallest and largest quartiles. Similarly, past TFP growth rates are positively correlated with future investment spikes for firms in the same quartiles. \
View Full
Paper PDF
-
The Role of Technological and Industrial Heterogeneity In Technology Diffusion: a Markovian Approach
February 2003
Working Paper Number:
CES-03-07
Recent empirical studies have established the importance of intra and inter-industry heterogeneity in investment in innovation and other outcomes. This paper examines the role of industry and technology heterogeneity in the diffusion of advanced manufacturing technologies from a simple Markovian approach. Using the Maximum Entropy estimator, I estimate transition probabilities and corresponding half-lives, look for outliers in technology and industry diffusion patterns, and try to find explanations of their unusual behavior in idiosyncratic technology and industry characteristics. A consistent industry-level pattern that emerged is one that relates consumer demand and production processes. It seems that in industries where hand-made products are a sign of quality to the customer, technology spreads very slowly. On the other hand, in industries where demand for sophisticated, high-precision goods is high or in industries where demand-driven product specifications vary quite rapidly over relatively short periods of time, advanced technologies diffuse much more rapidly.
View Full
Paper PDF
-
The Survival of Industrial Plants
October 2002
Working Paper Number:
CES-02-25
The study seeks to explain the attrition rate of new manufacturing plants in the United States in terms of three vectors of variables. The first explains how survival of the fittest proceeds through learning by firms (plants) about their own relative efficiency. The second explains how efficiency systematically changes over time and what augments or diminishes it. The third captures the opportunity cost of resources employed in a plant. The model is tested using maximum-likelihood probit analysis with very large samples for successive census years in the 1967-97 period. One sample consists of an unbalanced panel of about three-fourths of a million plants of single and multi-unit firms, or alternatively of about 300,000 plants if only the most reliable data are considered. The second is restricted to the plants of multi-unit firms in the same time span and consists of an unbalanced panel of more than 100,000 plants. The empirical analysis strongly confirms the predictions of the model.
View Full
Paper PDF
-
Analysis of Young Small Firms That Have Closed: Delineating Successful from Unsuccessful Closures
October 2002
Working Paper Number:
CES-02-24
This study of small businesses created between 1989 and 1992, and then closed down between 1993 and 1996, reveals that owners often described their firms as 'successful' when the disclosure decision was made. . Theoretical explanations consistent with this pattern are explored in this study. One view describes successful closures as rational outcomes of learning processes undertaken by entrepreneurs opening firms amidst considerable uncertainty. Another approach sees the seeming paradox of successful closure in terms of alternative opportunities: if something better comes along, the entrepreneur may close down. Empirically, successful closure owners are found to be moving on to more attractive alternatives.
View Full
Paper PDF
-
Parent-Child Bargaining, Parental Transfers, and the Postsecondary Education Decision
May 2002
Working Paper Number:
CES-02-13
Economic models of schooling decisions are largely unitary preference in nature. They ignore parent-child conflict, with parents often acting as the sole decisionmaker. In this paper, a theoretical model is formulated in which parents and child participate in cooperative bargaining as a means of resolving disagreements. The model's implications are compared to those of the unitary preference model, motivating tests of parental altruism and income pooling. Reduced form equations for years of postsecondary schooling and transfers are estimated, both for the full sample and for subsamples defined by type of disagreement, using student-level data from the National Center for Education Statistics' High School and Beyond Surveys. While income pooling is rejected only for the group of students who prefer more schooling than their parents, parental altruism is rejected for all groups. A major finding is that parent-child disagreement is an important determinant of the level of financial support parents provide.
View Full
Paper PDF
-
The Life Cycles of Industrial Plants
October 2001
Working Paper Number:
CES-01-10
The paper presents a dynamic programming model with multiple classes of capital goods to explain capital expenditures on existing plants over their lives. The empirical specification shows that the path of capital expenditures is explained by (a) complementarities between old and new capital goods, (b) the age of plants, (c) an index that captures the rate of technical change and (d) the labor intensiveness of a plant when it is newly born. The model is tested with Census data for roughly 6,000 manufacturing plants that were born after 1972.
View Full
Paper PDF
-
Output Market Segmentation and Productivity
June 2001
Working Paper Number:
CES-01-07
Recent empirical investigations have shown enormous plant-level productivity heterogeneity, even within narrowly defined industries. Most of the theoretical explanations for this have focused on factors that influence the production process, such as idiosyncratic technology shocks or input price differences. I claim that characteristics of the output demand markets can also have predictable influences on the plant-level productivity distribution within an industry. Specifically, an industry's degree of output market segmentation (i.e., the substitutability of one plant's output for another's in that industry) should impact the dispersion and central tendency of the industry's plant-level productivity distribution. I test this notion empirically by seeing if measurable cross-sectional variation in market segmentation affects moments of industry's plant-level productivity distribution moments. I find significant and robust evidence consistent with this notion.
View Full
Paper PDF
-
Market Structure and Productivity: A Concrete Example
June 2001
Working Paper Number:
CES-01-06
This paper shows that imperfect output substitutability explains part of the observed persistent plant-level productivity dispersion. Specifically, as substitutability in a market increases, the market's productivity distribution exhibits falling dispersion and higher central tendency. The proposed mechanism behind this result is truncation of the distribution from below as increased substitutability shifts demand to lower-cost plants and drives inefficient plants out of business. In a case study of the ready-mixed concrete industry, I examine the impact of one manifestation of this effect, driven by geographic market segmentation resulting from transport costs. A theoretical foundation is presented characterizing how differences in the density of local demand impact the number of producers and the ability of customers to choose between suppliers, and through this, the equilibrium productivity and output levels across regions. I also introduce a new method of obtaining plant-level productivity estimates that is well suited to this application and avoids potential shortfalls of commonly used procedures. I use these estimates to empirically test the presented theory, and the results support the predictions of the model. Local demand density has a significant influence on the shape of plant-level productivity distributions, and accounts for part of the observed intra-industry variation in productivity, both between and within given market areas.
View Full
Paper PDF
-
Plant-Level Productivity and the Market Value of a Firm
June 2001
Working Paper Number:
CES-01-03
Some plants are more productive than others ' at least in terms of how productivity is conventionally measured. Do these differences represent an intangible asset? Does the stock market place a higher value on firms with highly productive plants? This paper tests this hypothesis with a new data set. We merge plant-level fundamental variables with firm-level financial variables. We find that firms with highly productive plants have higher market valuations as measured by Tobin's q ' productivity does indeed have a price.
View Full
Paper PDF
