Papers Containing Keywords(s): 'production'
The following papers contain search terms that you selected. From the papers listed below, you can navigate to the PDF, the profile page for that working paper, or see all the working papers written by an author. You can also explore tags, keywords, and authors that occur frequently within these papers.
See Working Papers by Tag(s), Keywords(s), Author(s), or Search Text
Click here to search again
Frequently Occurring Concepts within this Search
Authors
Sang V Nguyen - 17
John Haltiwanger - 16
Lucia Foster - 16
Andrew Bernard - 13
J. Bradford Jensen - 11
Viewing papers 91 through 100 of 246
-
Working PaperProductivity Dispersion and Plant Selection in the Ready-Mix Concrete Industry
September 2011
Working Paper Number:
CES-11-25
This paper presents a quantitative model of productivity dispersion to explain why inefficient producers are slowly selected out of the ready-mix concrete industry. Measured productivity dispersion between the 10th and 90th percentile falls from a 4 to 1 difference using OLS, to a 2 to 1 difference using a control function. Due to volatile productivity and high sunk entry costs, a dynamic oligopoly model shows that to rationalize small gaps in exit rates between high and low productivity plants, a plant in the top quintile must produce 1.5 times more than a plant in the bottom quintile.View Full Paper PDF
-
Working PaperWage Dynamics along the Life-Cycle of Manufacturing Plants
August 2011
Working Paper Number:
CES-11-24R
This paper explores the evolution of average wage paid to employees along the life-cycle of a manufacturing plant in U.S. Average wage starts out low for a new plant and increases along with labor productivity, as the plant survives and ages. As a plant experiences productivity decline and approaches exit, average wage falls, but more slowly than it rises in the case of surviving new plants. Moreover, average wage declines slower than productivity does in failing plants, while it rises relatively faster as productivity increases in surviving new plants. These empirical regularities are studied in a dynamic model of labor quality and quantity choice by plants, where labor quality is reflected in wages. The model's parameters are estimated to assess the costs a plant incurs as it alters its labor quality and quantity in response to changes in its productivity over its life-cycle.View Full Paper PDF
-
Working PaperUsing the Survey of Plant Capacity to Measure Capital Utilization
July 2011
Working Paper Number:
CES-11-19
Most capital in the United States is idle much of the time. By some measures, the average workweek of capital in U.S. manufacturing is as low as 55 hours per 168 hour week. The level and variability of capital utilization has important implications for understanding both the level of production and its cyclical fluctuations. This paper investigates a number of issues relating to aggregation of capital utilization measures from the Survey of Plant Capacity and makes recommendations on expanding and improving the published statistics deriving from the Survey of Plant Capacity. The paper documents a number of facts about properties of capital utilization. First, after growing for decades, capital utilization started to fall in mid 1990s. Second, capital utilization is a useful predictor of changes in capacity utilization and other factors of production. Third, adjustment of productivity measures for variable capital utilization improves statistical and economic properties of these measures. Fourth, the paper constructs weights to aggregate firm level capital utilization rates to industry and economy level, which is the major enhancement to available data.View Full Paper PDF
-
Working PaperThe Cyclicality of Productivity Dispersion
May 2011
Working Paper Number:
CES-11-15
Using plant-level data, I show that the dispersion of total factor productivity in U.S. durable manufacturing is greater in recessions than in booms. This cyclical property of productivity dispersion is much less pronounced in non-durable manufacturing. In durables, this phenomenon primarily reflects a relatively higher share of unproductive firms in a recession. In order to interpret these findings, I construct a business cycle model where production in durables requires a fixed input. In a boom, when the market price of this fixed input is high, only more productive firms enter and only more productive incumbents survive, which results in a more compressed productivity distribution. The resulting higher average productivity in durables endogenously translates into a lower average relative price of durables. Additionally, my model is consistent with the following business cycle facts: procyclical entry, procyclical aggregate total factor productivity, more procyclicality in durable than non-durable output, procyclical employment and countercyclicality in the relative price of durables and the cross section of stock returns.View Full Paper PDF
-
Working PaperPost-Merger Restructuring and the Boundaries of the Firm
April 2011
Working Paper Number:
CES-11-11
We examine how firms redraw their boundaries after acquisitions using plant-level data. We find that there is extensive restructuring in a short period following mergers and full-firm acquisitions. Acquirers of full firms sell 27% and close 19% of the plants of target firms within three years of the acquisition. Acquirers with skill in running their peripheral divisions tend to retain more acquired plants. Retained plants increase in productivity whereas sold plants do not. These results suggest that acquirers restructure targets in ways that exploit their comparative advantage.View Full Paper PDF
-
Working PaperHow Does Size Matter? Investigating the Relationships Among Plant Size, Industrial Structure, and Manufacturing Productivity
March 2011
Working Paper Number:
CES-11-08
Industrial concentration and market power have been studied extensively at the national scale, in fields ranging from economics and industrial organization to regional science and economic development. At the regional scale, however, industrial structure and firm size relationships have received little attention outside of non-generalizable case studies, primarily because accurate measurements require difficult-to-obtain plant- or firm-level information. Readily available secondary data sources on establishment size distributions (such as County Business Patterns or the Census of Manufactures) cannot be linked to performance information for particular establishments or firms. Yet region-specific industrial structure may be a crucial determinant of firm performance and thus regional economic fortunes as well (Chinitz 1961; Christopherson and Clark 2007). This paper examines how industrial concentration and agglomeration economies impact plant performance, focusing on the influence of establishment size in mediating these effects. The Longitudinal Research Database of the U.S. Census Bureau is accessed to construct production functions for three manufacturing industries nationwide. These production functions, specified at the establishment level, incorporate characteristics of establishments, industries, and regions, including spatially-differentiated measures of agglomeration economies. Establishment size is evaluated both as an absolute metric and relative to other regional industry plants, as theory suggests that absolute size may be most pertinent to agglomeration benefits but relative size more relevant to industrial structure (Caves and Barton 1990; Bothner 2005). The research builds on earlier work by the author that establishes a direct link between regional industry concentration and the productivity of manufacturing establishments.View Full Paper PDF
-
Working PaperBeyond Cobb-Douglas: Estimation of a CES Production Function with Factor Augmenting Technology
February 2011
Working Paper Number:
CES-11-05
Both the recent literature on production function identification and a considerable body of other empirical work on firm expansion assume a Cobb-Douglas production function. Under this assumption, all technical differences are Hicks neutral. I provide evidence from US manufacturing plants against Cobb-Douglas and present an alternative production function that better fits the data. A Cobb Douglas production function has two empirical implications that I show do not hold in the data: a constant cost share of capital and strong comovement in labor productivity and capital productivity (revenue per unit of capital). Within four digit industries, differences in cost shares of capital are persistent over time. Both the capital share and labor productivity increase with revenue, but capital productivity does not. A CES production function with labor augmenting differences and an elasticity of substitution between labor and capital less than one can account for these facts. To identify the labor capital elasticity, I use variation in wages across local labor markets. Since the capital cost to labor cost ratio falls with local area wages, I strongly reject Cobb-Douglas: capital and labor are complements. Now productivity differences are no longer neutral, which has implications on how productivity affects firms' decisions to expand or contract. Non neutral technical improvements will result in higher stocks of capital but not necessarily more hiring of labor. Specifying the correct form of the production function is more generally important for empirical work, as I demonstrate by applying my methodology to address questions of misallocation of capital.View Full Paper PDF
-
Working PaperThe Effects of Environmental Regulation on the Competiveness of U.S. Manufacturing
January 2011
Working Paper Number:
CES-11-03
Whether and to what extent environmental regulations influence the competitiveness of firms remains a hotly debated issue. Using detailed production data from tens of thousands of U.S. manufacturing plants drawn from Annual Survey of Manufactures, we estimate the effects of environmental regulations'captured by the Clean Air Act Amendments' division of counties into pollutant-specific nonattainment and attainment categories'on manufacturing plants' total factor productivity (TFP) levels. We find that among surviving polluting plants, a nonattainment designation is associated with a roughly 2.6 percent decline in TFP. The regulations governing ozone have particularly discernable effects on productivity, though effects are also seen among particulates and sulfur dioxide emitters. Carbon monoxide nonattainment, on the other hand, appears to increase measured TFP, though this appears to be concentrated among refineries. When we apply corrections for two likely sources of positive bias in these estimates (price mismeasurement and sample selection on survival), we estimate that the total TFP loss for polluting plants in nonattaining counties is 4.8 percent. This corresponds to an annual lost output in the manufacturing sector of roughly $14.7 billion in 1987 dollars ($24.4 billion in 2009 dollars). These costs have important implications for both the intensity and location of firm expansions.View Full Paper PDF
-
Working PaperSoft Information and Investment: Evidence from Plant-Level Data
October 2010
Working Paper Number:
CES-10-38R
A reduction in travel time between headquarters and plants makes it easier for headquarters to monitor plants and gather 'soft' information--i.e., information that cannot be transmitted through non-personal means. Using a difference-in-differences methodology, I find that the introduction of new airline routes that reduce the travel time between headquarters and plants leads to an increase in plant-level investment of 8% to 9% and an increase in plants' total factor productivity of 1.3% to 1.4%. Consistent with the notion that a reduction in travel time makes it easier for headquarters to monitor plants and gather soft information, I find that my results are stronger: i) for plants whose headquarters are more time constrained; ii) for plants operating in soft-information industries; iii) during the earlier years of my sample period, when alternative, non-personal, means of monitoring and transmitting information were less developed; iv) for plants where information uncertainty is likely to be greater and soft information is likely to be more valuable, such as smaller plants and peripheral plants operating in industries that are not the firm's main industry.View Full Paper PDF
-
Working PaperTariff Pass-Through, Firm Heterogeneity and Product Quality
October 2010
Working Paper Number:
CES-10-37
Previous studies on tariff pass-through were constrained at the industry level. This paper is the first attempt to explore tariff pass-through at the firm level, and to investigate how it depends on firm heterogeneity in productivity and product differentiation in quality. Using an extended version of the Melitz and Ottaviano (2008) model, I show that exporting firms absorb tariff changes by adjusting both their markups and product quality, which leads to an incomplete tariff pass-through. Moreover, tariff absorption elasticity negatively depends on firm productivity for quality differentiated goods, but positively depends on firm productivity for quality homogeneous goods. Using the U.S. transaction level export data and plant-level manufacturing data, I find evidence for these predictions. The firm-level tariff absorption elasticity is 0.87 on average. All products in the sample on average fit the definition of quality differentiated goods, and the tariff absorption elasticity is indeed higher for low productivity firms (1.27) and lower for high productivity firms (0.44). Dividing all products into quality homogeneous goods and quality differentiated goods in terms of various criteria also results in estimates consistent with model predictions for quality differentiated goods.View Full Paper PDF
